Application:

PHAETON 2002-2007

OE Number:

3D0616039D 3W0616039 3W5616039 3W7616039 3W8616039 3D0616040D 3W0616040 3W5616040 3W7616040 3W8616040

Features with original standard, perfect match to your original car.

Features:
1. Correct distribution of all tire weights can improve steering, braking and tire wear.
2. Eliminate the vibration of the axle and wheels caused by the road surface, ensure that the wheels grip the ground at any time, thereby ensuring the steering and braking functions of the vehicle and improving the safety of the vehicle.
3. Absorb bumps and keep the tires on the road for better handling.
4. To prevent the heavy vehicles from damaging other parts.
5. The off-road performance of the vehicle can be improved even in extreme weather, and the noise is low, the friction is small, and the service life is long.

High Quality:
1. Professional installation is recommended.
2. Designed for excellent durability to ensure proper coordination and performance.

Air Suspension

As a starting point, it is important to discuss what is air suspension and how does it differ from traditional suspension systems? The main difference between a traditional shock or strut is that they have a dampening mechanism set to a certain ride control feel while an air suspension system uses an air compressor in combination with air struts and suspension air bags to control the feel of the ride.

HONGGU Air suspension has several advantages over traditional shocks and struts. The first is that the ride quality is often controlled by the driver of the vehicle. Therefore, if you want a softer ride you can set your air suspension system to deliver that and vice versa if you are looking for a stiffer, rougher ride. The second advantage is that you can control ride height, some systems are advanced in that they automatically control this for you. The final advantage of an air suspension system is weight management. If you load the back of your SUV with a large amount of groceries from the store, the air suspension system either automotically adjusts to handle it or you can manually adjust it. For traditional shocks and struts the level of rebound is set and therefore no matter what the weight of your load is, you have to stick with it. This often creates a sagging rear end when carrying a heavy load.

Air Suspension features:

1.Vulcanized, heavy-duty rubber air springs at each of the vehicle's wheels
2.An air compressor in the vehicle's trunk or under the hood of the vehicle
3.A storage tank for compressed air, which allows you to store air at around an average of 150 PSI
4.Valve blocks which direct air to the four springs from the storage reservoir through a set of solenoids, valves, and o-rings
5.ECAS computer that communicates between the vehicle's main computer to calculate where to direct air pressure
6.Air pipes connecting from the storage tank to the air springs that channel the flow of air throughout the suspension system
7.A desiccant-filled drier canister to keep the internal recesses of the system dry

Shock Absorber Advantage:

The two front tires bear the majority of braking and steering. Air spring ensures that weight is properly distributed to all four tires for optimal braking and steering. Progressive rate air springs significantly improve ride quality by better absorbing road inputs, while keeping your tires on the road for better handling.
The productive principle of Air spring
Honggu Air Springs are highly durable, precisely engineered and cost-effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs incorporating fabric-reinforced natural rubber flex-member construction and corrosion-protected end retainers, Air Springs provide superior quality and performance. As actuators, Honggu Air Springs can provide either linear or angular motion.

Air Suspension Function:
1. Aftermarket high Performance Air Suspension Strut Shocks

2. With low noise, friction and long lifespan

3. Reduce the frequency of vibration while driving on the road

4. With an improved design featuring a new Continental air spring bladder

Makes the ride more comfortable and gives the driver more control of ride height

An Air Spring

As air is directed into air springs, the bladders allow them to expand in a linear fashion, which permits them to be used as force-developing actuators, like pneumatic cylinders, and as such, rod attachments are available to mimic the function of them. Most often, however, an air actuator is simply two end plates connected by a bladder, and as they’re pressurized, force pushes the plates away from each other. As linear actuators, they can provide up to 35 tons of force, making them useful in various press applications, such as a forming press or small stamping press. Air actuators are also excellent for constant force applications, such as pulley tensioners or drum roller compression devices. All air springs are single-acting, unless they are coupled together so one extends while the other retracts.

Types of Air Springs
Outside of custom fabricated air springs, there are three available types of market-ready air springs.

1.Crimped, convoluted bellows, which attach the bellow to the bead plate by a permanent crimp in the plate. These provide good vibration isolation and linear/angular actuation, but are not for vehicle suspensions.
2.Sleeve bellows, which attach the bellows to the bead plate by an external clamp. This air spring type provides good vibration isolation, but only linear actuation. They are not typical in suspensions.
3. Rolling lobe bellows, which incorporate a piston at one end of the bellows, rather than a bead plate. This is most commonly found in vehicle suspensions, and is generally not recommended for vibration isolation.

Air Compressor

An air compressor is a pneumatic device that converts power (using an electric motor, diesel or gasoline engine, etc.) into potential energy stored in pressurized air (i.e., compressed air). By one of several methods, an air compressor forces more and more air into a storage tank, increasing the pressure. When the tank's pressure reaches its engineered upper limit, the air compressor shuts off. The compressed air, then, is held in the tank until called into use.

Product Real Photo:

About Us
Foshan Shunde Honggu Auto Parts Manufacturing Co., Ltd.,The company mainly engaged inautomotive chassis components, engine accessories,spray series products. The company provide design, research and development,production, sales, for the domestic and foreign automotive assembly plant and the global after-sales market to provide high quality automotive parts. The company now provides supporting services for Mercedes Benz,Audi,BMW,Volkswagen,Porsche,Land Rover,Bentley,Jaguar,GMC etc. Through brand positioning, the company provides high-quality original parts and cost-effective post-market brand parts for the global automotive sector.Now, it has set up agents and distributors in more than 35 countries around the world,HONGGU brand is the first batch of manufacturers approved by the Chinese ministry of commerce tomeet the export requirements.The company through the stable quality, the reliable prestigeand the customer first principle obtains the customer's support.
Company purpose: people-oriented, customer first, integrity first! Company philosophy:mutual benefit and common developmentl Company direction: develop quality products,adhere to the brand strategy.Trust and integrity are the cornerstones of our long-lastingrelationships and is essential in fostering loyalty and teamwork. We care about our people,our customers,suppliers and communities and about creating a sustainable future together.

FAQ

Q1:What's your advantage?
1. Resonable price ,good service
2. Reliable quality , long working life
3. Quick and safe modes of payment
4. Ships items timely and quickly
5. Best Warranty,easy return
6. Our products are exported to most countries in the world.

Q2:To which places have you exported?
North America, Europe, Middle East, Africa, Southeast Asia?and so on.

Q3:How about your delivery time?
5-7 Working days after receiving your payment.

Q4:Product categories
1. Air Suspension Springs and Shock Absorbers
2. Passenger Car Air Spring Rubber
3. Truck Suspension Cabin Air Springs
4. Spare Parts for Air Suspension Shock Absorbers
5. Convoluted Air Springs
6. Air Suspension Compressor

7.Engine Turbocharger
8. Power Steering Pump

Q5.How to guarantee your after sales service?
1.Strict inspection during production
2. Recheck the products before shipment to ensure our packaging in good condition
3. Track and receive feedback from our customers

Q6.What will you do for customer's complaint?
We will respond quickly to our customers within 24 hours.

Advantage

1. we are top 3 of professional air suspension manufacturer in China.
2. our factory has 120 staff, and we only produce 100% newly air suspension products for 10 years.
3. we have cooperated with 80 overseas companies with stable relationships. many are also brands or big sellers at Amazon or EBAY websites.
4. we have our own cars to test our products,except normal test machine and IATF16949:2016 certificate standard.
5. we have complete production line, Mercedes Benz,BMW Audi,Porsche,Land Rover,Volkswagen-these are our products,we has complete products line.
6. Our air suspension/air compressor/air strut/air suspension parts 100% NEWLY manufactured to instead OEM
7. We manufacture air suspension/air strut/air compressor to instead OEM ;
8. Constant temperature workshop for core parts;
9. Japan automatic welding machine to weld