2500-3000 Kg 50 MM Round Tube Straight With Free Backing Hydraulic Brake Trailer Axle

LOAD CAPACITY: the load rating of an axle must support the maximum gross vehicle (GVW) rating. If your trailer weighs 1,000 lbs and your equipment weighs 2,200 lbs, you will need at least a 3,500 lbs capacity axle.

SPINDLE OPTIONS: the spindle options available are straight or drop. A drop spindle will give you the lower deck but limits the width available for your deck. Most common spindle choice is the straight.

Fast lube Design.
Zerk fitting on the spindle uses a rubber plug on the hub cap to grease bearings simply.
Grease your axle without pulling off your whole entire hub.

Underslung – Axle is welded with spring seats on the bottom (Axle sits on top of the springs) which Allows for lower ride height. For optimal usage, use with double eye springs

High Strength Cambered Steel Axle Tube Construction to ensure Even Tire Wear so the tires will last longer.

Powder coated black.

Features:

Axle Beam Acts as part of your trailer Suspension for hauling loads.

Great for replacing an old axle or bent damaged axle on your trailer

Made of High Strength Steel

Underslung axle design: spring pads are welded to the underside of the axle for mounting leaf springs.

Spring pads are pre-welded on the trailer axle for your convenience.

The 5 lug Hub Drums & Electric Brakes are assembled on the axle and 5 lug idler hubs on other axle with the bearings, seals, pre-greased, fully assembled for simple installation on your trailer.

Great for Utility Trailer Axle, Boat Trailer Axle, Car Haulers Trailer Axle, ATV Trailer Axle, Lawn & Landscape Trailer Axle, Motorcycle Trailer Axle, BBQ Pit Trailer Axle, Cargo Trailer Axle, Enclosed Trailer Axle, RV Trailer Axle & More