2 Tires TPMS Truck Tyre Pressure Monitoring System for Bus
Product parameters
Receiver | |
Display interface | LCD segment code (7 rounds with the same display) |
Receiver port | Vehicle battery, ACC input and RS232 output |
Machine weight (excluding packaging) | 230g±5g |
Working temperature | -30-80℃ |
Power supply mode | Built-in rechargeable lithium battery and external power supply |
Interface voltage | Vehicle battery 24V, ACC24V |
Built-in battery voltage | 3.5V-4.2V |
Bright working current | 12mA |
Black working current (for data communication) | 4.5mA |
Reception sensitivity | -95dbm |
System function
Prevent tire blowout and reduce the risk of accidents;
Reduce vehicle tire damage and extend the service life of tires;
Reduce fuel consumption of vehicles, reduce the cost of use of vehicles;
Tyre Pressure Monitoring System for CAR, Truck Trailers , Semi Trailers , Caravans , RVs, 4WD, Motor holmes , any vehicles that has pneumatic tyres.
This unit monitors tyre pressure and temperature in your tyre, once you set the limit is exceeded an audible alarm is triggered for you to check your tyre. It will signal you with an alarm in up to 8 different conditions including fast and slow leakage, pressure loss and high pressure or high temperature situations.
Esteemed customer:
Thank you for buying our Tire pressure Monitoring System (TPMS). This system makes you more safety when driving.It can real-time monitor tire pressure and temperature conditions.If detected any abnormal pressure and temperature of tires, the system will transmit real-time voice alarm and flash warning icon to remind the driver.
1.Q: Can we get your free samples?
A: Yes,you can.Our samples are only free for the customers who confirm bulk order.But the freight for express is borne by buyer.
2. Q: Can we do printing or label printing on the sensor?
A: Yes,you can.We could offer various printing methods:label printing,screen print,hot stamping,frost,etc.And as to printing color:Color can be made according to PANTONE color number .
3.Q: Can you produce sensor according our design?
A: Yes,we could produce models according to customer’s design.
4. Q: What is the normal lead time?
A: For stock products,the products are be sent within 7days after receiving payment.
5.Q: How do you control the quality?
A: We do leak test for 3times before packing.
6.Q: If any defective sensor,how can you settle it for us?
A: We will 1:1replacement for the defective sensors which cause by ourside.