Heavy Duty Twelve Tire TPMS Truck Tire Pressure Monitoring System
component of product
Low power warning
No signal warning
Parameter Setting
Features
Real-time monitoring the pressure and temperature, 4 tires data displayed simultaneously
Wireless transmission technology,100% DIY installation
With built-in rechargeable explosion proof lithium battery,panasonic cr1632
Vibration awaken controlled
Support' BAR' 'PSI' unit optional
Wireless monitor could be placed anywhere.
Product parameters
Receiver(26 rounds) | |
Display interface | LCD segment code (26 tires with the same display) |
Receiver port | Vehicle battery, ACC input and RS232 output(about receiver) |
Machine weight (excluding packaging) | 230gram±5gram |
Abnormal self-recovery | Toggle Switches(The switch is facing up, restart after disconnecting the external power supply.) |
Working temperature | -30℃-80℃ |
Power supply mode | Internal rechargeable lithium battery and external power supply |
Interface voltage | Vehicle battery 24V, ACC24V |
Built-in battery voltage | 3.5V-4.2V |
Bright working current | 12mA |
Black working current (for data communication) | 4.5mA |
Reception sensitivity | -95dbm |
Dimensions | 13.5cm*6.5cm*2.2cm |
Pressure range | 0bar~14bar/0psi~203psi |
type | internal binding type sensors |
color | black |
Sensor (internal binding type sensor) | |
Plastic parts material | Nylon + glass fiber |
Machine weight (excluding bind belt) | 30gram±1gram |
Shell temperature resistance | -50-150℃ |
bind belt material | 304 stainless steel |
Power supply mode | Button Battery |
battery model | CR2050 |
battery capacity | 345mAh |
Working voltage | 2.1V-3.6V |
Working temperature | -40℃-125℃ |
working temperature | 8.7mA |
Self-test current | 2.2mA |
Dormant current | 0.5uA |
Working temperature | -40℃-125℃ |
Transmit frequency | 433.92MHZ |
Transmit power | >-12dBm |
Dimensions : | 7.3cm(length)*2.73cm(width)*2.2cm(height)(excluding antenna) |
Product attention
Tires have natural micro leakage phenomenon. It is a normal phenomenon that pressure of tire decreases over time. Pressure decreasing don't have directly relationship with install this products.
It is a normal phenomenon that pressure is unstable due to thermal expansion during driving. It don't have directly relationship with install this products.
Incorrectly installation will affect the use of this product or make damage. experienced technician is preferred to install this product. please be careful not to damage the sensor transmitter when disassembling tires again. Valve of internal sensor is not available for repeat assembling/disassembling.
Please use power cable provided by factory. It is not allowed to tie receiver by power cable, as I will damage product or effect signal . And you will lose warranty.
Most of the DVD or other high power equipment in the market are all have electromagnetic interference. In order to avoid electromagnetic interference, receiver is suggest to install 50CM away from such kind of products. The best position is upper left corner, upper right corner of A column and middle of front seats (away from control)
There won't be notice if there is any change of products ( performance, specifications, warranty).
* This system send signal by wireless transmission, so it may not receive signal under some certain condition, like interference, error operation or improper installation. If receiver can't receive signal for 10 minutes, please drive car away from current place ( maybe there is strong signal interference ) or go to authorized tire repair center to check is there any problem of sensor or battery of sensor is run out( battery life maybe shorter than normal use, as there is often abnormal condition occurs, sensor need to send signal to warn driver.)