Aluminum corrosion-resistant fin material 6815 fin width 42.5 mm for micro-channel condenser

Speed water -type vertical wing tablets are a special vertical wing tablet. It is characterized by a certain tilt angle at the end of the wing tablet, so that condensation water can quickly flow down from the wing tablet, avoiding condensate water on the wing tablet, which affects the change. Thermal efficiency. Fast -rowed vertical fins are mostly used for aluminum ductal evaporators for tube shell -type heat exchangers and cold storage. It is suitable for heat changes between water steam and water, or other variable heat changes. The advantage of fast -ended vertical wing tablets is:
1. It can increase the heat transfer coefficient of the heat exchanger and reduce the volume and weight of the heat exchanger.
2. It can reduce the resistance of condensation water on the fins and reduce the power consumption of the fan.
3. Prevent condensate water from frosting or freezing on the fins, extend the service life of the heat exchanger

Features:

Speedwater vertical wing tablets are a new type of micro -channel heat exchanger. It has the following product characteristics:
• High -efficiency heat exchange: Fast water -exhausting vertical fins adopt a unilateral extension design, which increases the contact area between the wings and the flat pipe and improves heat exchange efficiency. At the same time, the wings are connected to the drainage channel of the flat pipe, so that the cream and condensed water can be quickly discharged, reducing the wetting area of the heat exchanger, reducing the wind resistance, and further improving the heat exchange efficiency efficiency
• Energy -saving and environmental protection: Speedwater -exhausting vertical fins use micro -channel flat pipes. Compared with traditional circular copper pipes, microcardiac flat pipes can reduce the amount of refrigerant and reduce the energy consumption and carbon emissions of the refrigeration system. In addition, the material of the micro -channel flat pipe is aluminum alloy, which has the advantages of light quality, corrosion resistance, recyclable
• Compact structural: The size of the speed -exhausting vertical wings is smaller, the weight is light, and the occupation space is small, which is convenient for installation and maintenance. Fast water -type vertical fins can be flexibly combined and spliced according to different applications and needs, forming different specifications and forms of air -cooled modules

Production Process:

Fin stamping →aggregate→header assembly→press forming→degrease spray (FLUX) drying,

Preheating→(NB) →brazing→ forced air cooling →plastic connection pipe welding →helium leak detection→ultrasonic cleaning→coating→ drying →sheet metal assembly →final inspection→packaging

Techical Parameters:

Applications:

Household heat pump and air-conditioning condenser;

Commercial multi-line evaporator, condenser;

Commercial heat pump system (module machine) evaporator;

Bus and car air-conditioning evaporator, condenser;

Commercial air-conditioning duct machine evaporator;

Electric locomotive, rv, truck, engineering vehicle condensers, evaporator;

New energy vehicle air conditioning condenser, evaporator...

Etc.

Support and Services:

The fin, micro-channel cooling tube and collecting tube can be customized according to customer's requirements, product width up to 1500mm, length direction can be any size.