Nichrome Inconel 600 Resistor Wire Nickel Alloy Wire/Rod/Tube Alloy 600/UNS N06600 For Mesh

Inconel 600 is a nickel-chromium alloy used for applications that require corrosion and high temperature resistance. This nickel alloy was designed for service temperatures from cryogenic to elevated temperatures in the range of 2000° F. It is non-magnetic, has excellent mechanical properties, and presents the desirable combination of high strength and good weldability under a wide range of temperatures. The high nickel content in Inconel 600 enables it to retain considerable resistance under reducing conditions, makes it resistant to corrosion by a number of organic and inorganic compounds, gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions. Typical applications of this nickel alloy include the chemical, pulp and paper, aerospace, nuclear engineering and heat treating industries.

Inconel Alloy 600 is a nickel-chromium alloy with excellent carburization and good oxidation resistance. It was designed for use from cryogenic to elevated temperatures in the range of 2000°F (1093°C). The high nickel content of the material provides exceptional resistance to chloride stress corrosion cracking.

Chemical Composition, %

2.TEMPERED: HARD

Ultimate Tensile Strength: 125 KSI min (860 MPa min)
Yield Strength: (0.2% offset) 90 KSI min (620 MPa min)
Elongation: 2% min ( gauges > 0.010 inches)
Hardness: Rc 30 min

3.What are the characteristics of Inconel 600?

• Resistant to a wide range of corrosive media.
• Virtually immune to chlorine ion stress corrosion cracking
• Non-magnetic
• Excellent mechanical properties
• High strength and good weldability under a wide range of temperatures