PVDF 4mm Aluminum composite Panel For Cladding Aluminum sheet Materials

Structural Section of aluminum composite panel

Aluminum Composite Panel is compounded by multilayer materials, the surface and back covered by high strength aluminum alloy sheet, the core material is non-toxic low density polyethylene(PE) , on the surface of aluminum composite panel covered by protective film.

1. Protective film
2. PE Coating or PVDF Coating
3. Aluminum skin
4. PE Core material
5. Rear coated Aluminum skin

Characteristic of ACP

• High Strength

ALUDONG adopt super quality aluminum , high strength , greatly enhance the panel’s strength to ensure the perfect effect in wind load resistance, shakeproof.Superior weather-resistance and ultraviolet (UV) resistance, acid-resistance and alkli-resistance.

• Environment-friendly :

No pollution to the enviroment , it is green building decorative material, No changes in surface coating .

• Light weight

ALUDONG aluminum composite panel are composite of aluminum and plastic ,which is lighter than other decorating material.

• Non inflammable

The non inflammable external aluminum sheets offer protection to polyethylene core material, and cut off heat conduction in the initial stages of combustion, with flame resistance up to international standard.

• Economy

ALUDONG with the use of quality coating , aluminum composite panels are dispensed with longtime maintenance; because it is self-cleaning, they can be cleaned by neutral cleaning agent and clean water, and come out to be fairly new after cleaned.

• Design performance

If requested by customer, aluminum -plastic panels can be made to different colors and shapes to meet the original design of architects, thus bring perfect decorating effect.

• Durability

ALUDONG fluorocarbon coated aluminum composite panels are featured by high durability ,good resistance against weather, high temperature, wear and pollution.

• Width: 1220mm 1000mm, 1500mm, or range from1000mm-1570mm
• Length: 2440mm 3050mm, 5000mm, 5800mm, or any
  other length that can be put into a 20GP
  container
• Panel Thickness: 3mm, 4mm 2mm, 5mm, 8mm , or range from 1.5mm-8mm
• Aluminium Thickness: 0.5mm,0.4mm, 0.3mm, 0.21mm, 0.15mm, or range from 0.03mm-0.60mm
• Surface Finish: Brushed, Maple, Mirror , PE, PVDF, FEVE Coating
• Color: Metallic Color, Gloss Color, Pearl, Mirror, Maple,Brushed, etc
• Certification: ISO 9001:2000, ISO9001:2008, SGS ,CE,Rohs, Fireproof Certification
• Packing: Wooden Pallet or Wooden case or Nude Packing

ACP Coating Features

• Polyester coating
• PE coating has good adhesion to the material. The color coated steel plate is easy to process, cheap, and has many products, and the choice of color and luster is great. In the general environment directly exposed, the corrosion period can be as long as 7 to 8 years.

• Lacquering
• ALUDONG surfaces the coating is high-quality lacquering systems , which own good chemical causticity resistance, and abrasion resistance and so on. For externel wall decoration ,use PVDF Coating and FEVE Coating is better choice, because the coating systems have excellent surface durability .which can keep 10-15 years.

• Nano-coating
• ALUDONG Nano coating is a special clear lacquering system which has excellent self-cleaning characteristics, the total dry film thickness shall be 35 micron minimum consisting of a conversion coating ,an inhibititive primer, lumiflon-based fluorocarbon and clear coating.

• Chameleon colors coating
• With pearl talc in PVDF paint (70% PVDF), the pigment type and viewing angle distinguish it with other coating .The different wave lengths of light reflected ,refracted and diffracted to the audience makes an ever-changing color gradient with iridescent highlights.

• Nacreous coating
• Nacreous coating is three-coat three-bake system . The thickness is 35 micron minimum consisting of a conversion coating , an inhibitive primer, lumiflon-based fluorocarbon coating and nacreous coating. The surface glossiness is around 90 degree. It is as excellent choice for the places which highly demand the surface glossiness.

• Variety of Colors
• From a wide range of standard colors, customers can select both metallic colors and solid colors. tailor-made colors are available on request.

The gloss for solid and for metallic colors is in the range of 30%-40% according to Gardner Scale which is most suitable for architectdner applications. For special effect colors, the gloss is in the range of 70%-80% according to Gardner Scale. Due to their high gloss, panels coated in special effect colors need special care in the design and during fabrication and installation.

Company Information
Henan Aludong Decorative Materials Co., LTD. is located in Rm 1305A, Green Center South Tower, Dongfeng South Road Chuangye Road,Pilot Free Trade Zone(Zhengzhou), Zhengzhou City, Henan Province,China. Advantage throughout the whole country, richly endowed by nature. ”The company covers an area of about 639 acres, the construction area of about 230751 square meters, is the largest production base of Chinese decorative building materials, belonging to China Building Materials Industry Association member units, specializing in the production of APCP, aluminum veneer of the large-scale joint-stock enterprises, production experience, strong technical force, has a perfect production equipment and strict processing quality monitoring instruments.“Henan Aludong Decorative Materials Co., LTD.”and Shanghai Jixiang Building Materials Group Co. Ltd., Zhengzhou Jin Mu Decoration Material Co. Ltd., Zhejiang liantai Instrument Co. Ltd., Yueqing Zhongtian Plastic Co. Ltd., Yueqing Zhongtian Instrument Co. Ltd., Shanghai long coating Limited company under the Shanghai Jixiang building materials group.