6063 T5 Powder Coated Aluminum Profiels For Windows and Doors Frame

Aluminum Profile meter weight( kg/m) tolerance

• Wall thickness 1.2 : ±5% kg/m
• Wall thickness 1.0-1.1: ±7%kg/m
• Wall thickness 0.8-0.9: ±8%kg/m
• Wall thickness 0.6-0.7: ±10 %kg/m
• Wall thickness <0.6: ±12%kg/m
• Powder coated thickness: >50μm

Descrition:

Powder Coating Aluminum profiles are the most popular material which is mainly applied in doors and windows for South American market, especially in Mexico and Columbia. The quality is much better than mill finished aluminum profile. Its life is much longer and surface is much more smooth and colorful.
White color is the most popular in the market, besides white color MAXL also provides other colors according to Ral card, Wood grain thermal transferring style.





Competitive Advantages:

• Cost: The whole production lines are adopted, produces the products begin from aluminum ingot, minimize the cost from every single step.
• Quality: The modern management and advanced equipments create the stable and super quality.
  E.G: The most advanced aluminum rod homogenizing furnaces are adopted to make the aluminum rod more stable.Use spray cooling method which is much better than sink into the water.Vertical full automatic powder coating line with double spraying process make sure the coating thickness is more than 50μm and the powder adhesives on the surface evenly. It is more advanced than horizontal type as well as the quality.
• Service: Any request will be replied within 24 hours, Local office in Mexico, Colombia and Canada, no communication problem, no time difference problem.

You can also get these advanced conditions below:

1. More than 400 types moulds are adopted, can meet almost all kinds of design in South American market.
2. Good Quality Control, CE, ISO certificates approved.
3. Fast Delivery, Only 15 Days which is not easy achieve for other factory in China.
4. Expert export Package, perfect protection, length could reach to 5.995m, full loaded and minimized the waste space of 20GP and 40HQ container.
5. The drilled hole is close to the edge, cost will be saved due to such distance.

Packing process

First Step: EPE Foam will protect the profiles from the impacting outside.

Second Step: Kraft Paper to tight the profiles and prevent the water.


The last Step is the shrink film.
Each step ensure the prection would be perfect.


Have you met the problems with your supplier below?

• No suitable mould
• The quantity is too less to produce
• High rate in surface scratching
• Long production time
• Damaged in shipping
• Language problem
• Low efficiency because of time difference

Try MAXL, the expert manufacturer of aluminum profile for South American market, ready to serve you all the time.