3mm Aluminum Solid Panel with PVDF Coated for High Rise Building

Product Overview:

Product Information:
The Aluminum Solid Panel is made of high-quality high-strength aluminum alloy sheet, and its commonly used thickness is 1.5mm, 2.0mm, 2.5mm, 3.0mm. The maximum width of the sheet is within 1400mm, the maximum length is within 4500mm, and the aluminum alloy series is 3003 1100 or 5005. It consists of a panel, reinforce bar and bracket. The corner bracket can be directly stamped from the panel, bent and formed, or the corner bracket can be riveted on the small folding edges of the panel. The reinforce bar are connected to the welding screws behind the board surface, making it a solid whole, which greatly enhances the strength and rigidity of the solid aluminum cladding panel, and ensures the flatness and resistance to wind pressure and earthquake resistance of the aluminum cladding in long-term use. If sound insulation is required, high-efficiency sound insulation materials can be installed inside the aluminum panel.

Specification:

General Thickness :1.5mm, 2mm, 2.5mm, 3mm,3.5mm,4mm etc,

Scopes of Application:
1). Aluminum façade, Aluminum Cladding, Exterior Wall Decoration.
2). Interior Wall Decoration, column cladding
3). passageway,, elevator, shopfront decoration, advertisement boards.
4). Ceiling and so on.

Product advantages:
1) Lightweight, good rigidity and strength;
2) Non-flammable, excellent fire resistance;
3) Excellent weatherability resistance, excellent ultraviolet ray resistance, superior resistance to acids and alkali, shelf life is 15 years without discoloration under normal outdoor environment;
4) Good processing technique, plane, arc and round processing etc all are available;
5) With complicated shape such as pagoda, difficult to get dirt, easy for maintenance and caring.;
6) Wide color selection, ultra good decoration effect;
7) Easy to be recycled, with no pollution, good for earth saving

Our Company

Our workshop

Equipment

Certifications&Awards

Packing