Aluminum High-Low Buckle Flat Transition Strips Laminate Floor Edging Strip

In home decoration, we usually do not lay a certain kind of floor or floor tiles. Taking into account factors such as convenient cleaning, space division, and beautiful decoration, we usually use floor tiles and wooden floors to mix and match, such as the hallway and the living room, the living room and the bedroom. , Living room and bathroom, etc. Although the use of fancy splicing has many benefits, the problem also arises: how to connect the wooden floor and the floor tiles?

1. The aluminium transition strips, mainly through the flat bead to cover the gap between the floor and the floor tiles. This method of treatment generally uses a T-shaped blanking strip to ease the transition of the two materials. If there is a small height difference (within 5mm), it can be connected with a sloped bead, and it will not hinder walking.

Common materials include copper, wood, stainless steel, rubber strips, aluminum alloys, etc. Use copper strips to close between the wooden floor and the floor tiles, and just apply glass glue directly, and it will not rust.

2. The aluminum high-low buckle is similar to the transition strips, but the high-low buckle is suitable for the ground plan with a slight gap between the wooden floor and the floor tile, and can subtly ease the design of the ground with the height difference.

It is also possible to calculate the elevation of the finished surface of the two before laying the wooden floor and tiling the floor tiles, and the two are flushed, and an additional keel is installed under the flat interface, and then the floor and the floor tile are connected with a 1-2mm corner of the floor Then smooth it with transparent silicone. used aluminum transition strips is good idea.