4mm Silver acp sheet NANO PVDF coating aluminum composite panel for building cladding

megabond® ACP compared with different products( Lightness / Rigidity ):
The composite structure of megabond® results in an impressive strength-to-weight ratio, even when comparing large panel sizes. Despite its low weight, which makes megabond® easy to transport and handle in the factory and on site, its rigidity and high strength make the panels keep their shape and remain flat, even when exposed to extreme temperature changes. Comparison of thickness and weight of panels with equal rigidity.

3)Standard:
A) West Europe standard ( Germany DIN Standard).
B) The EAST Europe standard ( Russian standard ).
C) The commonweathlth standard (U.K BS Standard ).
D) The North America ASTM standard.

Advantage of Nano ACP:
1) Self-cleaning: Due to the applying of Nano paints on top, any dirt can not attach onto it easily, so there’s nearly no need for manual cleaning.
2) Glossy efftect: Due to the extra layer of Nano paints, the gloss rate of Nano ACP is higher than ordinary PVDF or PE coating ACP. Thus Nano ACP can bring your building a shinny and glossy look.
Packing: In bulk or pallet

Product Available

Nano Aluminum Composite Panel
Nano aluminum composite panel has the advantages of traditional fluorocarbon aluminum composite panel, such as peeling resistance, corrosion resistance, fading resistance. However, it is superior to the traditional fluorocarbon aluminum composite panel in many aspect such as stain resistance, self cleaning, acid and alkali resistance due to the high-tech nano coating technology

Excellent Self-cleaning Properties
When nano aluminum composite panel is compared to ordinary acp panels, we found that its surface has excellent self-cleaning properties. Usually after half an year, the ordinary aluminum composite panel wall surface pollution is serious due to dust and rain.

Especially when the poor quality assurance silicone sealant used in some projects have been immersed in rain for a long time, and a large amount of black ink is discharged from the joints, which is not only difficult to clean, but also seriously affects the appearance of the wall.

Now the nano aluminum composite panel has greatly solved this problem. Because its tension of the coating is extremely low, which made the stain much difficult to attach. Thus, a small amount of dirt can be removed by rinsing with rain water, which can achieve self-cleaning effect. Which save the owner a lot of cleaning and maintenance costs each year.

Identification Method of Nano aluminum composite panel
The simplest identification method of nano aluminum composite material is to apply oil-based pen to the surface. If there is no trace after wiping then must be nano acp panels, the scratches of ordinary aluminum composite panel are difficult to erase.

Panel thickness: 3-6mm, recommended 4mm.
Board width: 1000-1575mm, recommended 1220mm, 1250mm, 1500mm.
Board length: up to 5800mm, recommended 2440mm, 3050mm, 4050mm

Material selection
Aluminum panel substrate: high strength aluminum alloy coil
Core material: non-toxic low density polyethylene
Surface coating: fluorocarbon nano-coating

The principle of nano acm panels:
A self-cleaning protective layer is sprayed on the surface of the fluorocarbon coating, which can be separated from contaminants such as ash layer and decompose organic pollutants in the atmosphere to achieve self-cleaning effect.