Standard Product

Item No.: KT5001(without adhesive backing), KT5011(with adhesive backing)

Colour: two-colour,three-colour,four-colour, multi-colour

Pre-formed coloured floor markings can be produced in different sizes, shapes and colours.

Application

Widely used in various highways and graded roads.

Suitable for all kinds of competitions, large-scale activities, scenic spots, tourism promotion and other ground logo patterns.

Proper surface preparation is essential for satisfactory results. Essentially, the surface must be clean and dry, with a minimum surface temperature of, 10℃ and rising. Pavement Marking Tape cannot be successfully applied over loose or caked dirt, gravel, oily residues, road salt residues, or other foreign substances which will interfere with proper bonding. Manufacturer’s application instructions with more detailed information are included in each carton.

Product Features

• Good flexibility and tensile strength.

• The surface is coated with reflective glass beads, which has good night reflection.

• Use of high-performance gule, with good wear resistance.

• The bottom layer is an adhesive with strong adhesion and good weather resistance, which makes the tape stick firmly to the ground.

• Preforming and easy laying.

Usage

Customized preformed marking (pattern) is divided into embedded construction and surface construction, with the use of primer glue. Under the condition of the new road surface, each kilogram of primer glue can lay 3-5 square meters of highway reflective tape, and the actual use is mainly based on the condition of the road surface. Please refer to the construction instructions.

Performance Life

The performance life of KT5001/KT5011 plastic marking materials will vary greatly depending upon traffic conditions, snow removal practices, pavement surfaces, and application techniques.