PVC Floor Marking Tape - Single Color
Descriptions:
A thin premium grade plasticized PVC film coated with an aggressive rubber based adhesive with good characteristics. The product performance is stable and wear-resistant. And it is unaffected by most chemicals and moisture. It has been designed for all color coding and floor lane marking application.
Technical Specification
Property | Unit | Product code | Test method | ||
FM130S | FM150S | FM170S | |||
Total Thickness | mm | 0.13 | 0.15 | 0.17 | ASTM-D-1000 |
Tensile Strength | N/cm | 20 | 22 | 25 | |
Elongation at break | % | 130 | 150 | 170 | |
180°Peel Adhesion to steel | N/cm | 1.5 | |||
To backing | 1.5 | ||||
Unwind force | KV | 2-4 |
Standard Products
Thickness | 0.13mm, 0.14mm, 0.15mm, 0.17mm |
Roll width | 24mm, 48mm, 50mm, Can be customized |
Roll length | 22m, 33m, 55m, Can be customized |
Log roll size | 1250mm x 22m, 1250mm x 33m, Can be customized |
Core | PE core, Diameter is 76.2mm |
Single color | Black, White, Red, Blue, Yellow, Green |
MOQ | 5000 Rolls |
Samples | Free(Freight on buyer) |
Applications:
Indicated for floor marking of sport courts, factories, offices, banks, mails, parking lots. It can also be used for marking clear and smoked glass, as well as identifying industrial facilities (oil, water, and other products pipes ). Used for decorating and protecting.
Feature & Benefits
• Strong viscosity, Non-residual glue
• Waterproof, moisture proof
• Weather resistance
• Corrosion resistance and antistatic.
• Wide range of application scenarios
• Wear resistance and solvent resistance
Packaging & Shipping
Packing Details: | 1. Each layer is padded with a thin film |
2. Individually packing | |
3. 36roll/carton, 54roll/carton | |
According to customer's requests |
Recommendations
Rolls should be stored flat on their cut edges in the original packaging. The products must be protected from dust, heat, moisture, direct sunlight and solvent fumes. The storage temperature should be between +10℃ and +25℃ x 65%R.H. Use within 12months of receipt. The tape should be applied with sufficient tension to ensure an optimum bonding and a minimum of two layers with a half overlap. The final layer should be wrapped with a lower tension to prevent flagging effects. Surfaces should be clean, dry and free of dust, grease, oil or other contaminants.