HRC55 - HRC60 Chrome Plated Rod Hydraulic Accessories Use​

Introduction of Chrome Plated Rod

Generally, in oil cylinders and hydraulic cylinders, there are many applications of chrome-plated rods, and what they specifically include are mainly:
(1) The material is usually made of No. 45 steel, so that it can withstand greater impact. However, if it is used for heavy load transmission, it is better to use 40Cr as a material.
(2) Generally speaking, chrome-plated rods are cylindrical. When the diameter is relatively large, hollow chrome-plated rods can be considered, which is sometimes good.
(3) If the surface of the chrome-plated rod is finished, the roughness should not be greater than 0.65um, otherwise it is unqualified.
The most widely used materials for chrome-plated rods are: 40Cr, No. 45 steel.
(Product of a certain manufacturer) Material: High-quality 45# steel Hardness: HRC62+2 Surface hardening thickness: 0.8~2.5mm Surface roughness: Ra0.2-0.4 Hard chrome thickness: 0.015-0.025mm Straightness: 80μm/1000mm.

Usage of Chrome Plated Rod

Chrome Plated Rod is widely used in rubber and plastic machinery such as oil cylinders, cylinders, injection molding machines, blow molding machines, die-casting machines, air hydraulic machinery, engineering machinery, medical machinery, light source machinery, textile machinery and other automation equipment.

Parameters

technical standard:

Outer diameter accuracy: f7, f8, h7
Surface finish: ≦Ra0.4S
Roundness: ≦0.01mm
Straightness: ≦0.15/1000mm
Hard chrome plating thickness: 0.015~0.05mm (can be customized according to customer requirements)
Surface hardness: HB220-260
Standard outer diameter: ￠3~￠120
Standard length: 1000-6000mm
Material: S45C (45#), 40Cr, GCr15, 2Cr13, 42CrMo, SUS304, SUS303, SUS316, etc.

Picture