Aluminum 1060 Deep Drawn Metal Stamping Lampshade Cover Deep Drawn Aluminum Cover

Aluminum Deep drawn Metal stamping Introduction

1.Deep drawn Metal Stamping parts are mainly composed of aluminum / stainless steel / carbon steel / alloy steel / brass

2.Deep drawing Metal Stamping parts use metal stamping / deep drawing / shearing / punching.

3.The suppression environment is 500T

4. The surface of Deep drawn metal stamping parts is anodized / powder sprayed / painted / silvered. The product is not easily affected by the environment during the later use, which causes other problems such as rust..

What is Deep Drawn / Deep Drawing?

Deep drawn metal stamping is the process of forming a metal part from metal sheet stock, also called a metal blank, and requires a punch, die and blank holder.

The metal forming process is considered deep drawn metal stamping if the depth of the item created is equal to or greater than its radius. Therefore, deep drawn metal stamping is used to fabricate parts and products that are deeper than metal stamping can accommodate. In fact, when the specifications and/or selected metal limits the part depth on a single draw, a deep drawn metal part can be redrawn to achieve the final seamless form.

Deep drawn metal stamping, also known as drawing, stretching, calendering, etc., refers to the use of a die to punch a flat blank of a certain shape obtained after punching into various open hollow parts or reducing the diameter of the open hollow blank to increase the height Kinds of machining processes. The deep-drawing process can be used to manufacture cylindrical, stepped, tapered, spherical, box-shaped and other irregular-shaped thin-walled parts. Cooperate with other stamping and forming processes such as flanging, bulging, flaring, necking, etc., it can also manufacture parts with extremely complicated shapes. Therefore, the drawing process occupies a very important position in the production process of industrial sectors such as automobiles, airplanes, tractors, electrical appliances, instruments, and electronics.

Deep drawing metal stamping parameters

Below is some questions you may want to know:

Questions: How to know the chemical composition of stainless steel deep drawing parts according to our requirements?

Answers: When we offer samples or batch parts, we will also send you our material list from our material factory, it shows more detailed.

Questions: How to guarantee your final size can meet our drawing request?

Answers: we will make moulds according to your 3D drawing. And we also do sampling when batch production start, to make assure the final dimension can meet your request.

Questions: How to make sure the color after painting or powder coating can be correct?

Answers: We have color card with different color number, such as RAL9016, we will contrast the sample surface and color card, to make sure the final surface effect is correct.

Questions: Generally, how do you packing the goods?

Answers: normally, for inner package: the goods is nude, for outer package: carton + plywood. If you have special request for inner or outer package, pls indicate it when you send us new inquiry.

Questions: If we find the defect products exist in the batch parts, how to do?

Answers: Yes,your caution is very good, in fact, when batch production, we need do sampling. Before shipment, we also do testing to make sure the quality is ok. If you found several defect product exists, pls take photos and send your quality feedback, we will check and send you quality products. But pls be assured that our products is qualified, unless caused by the worker's mistake to place.