6063 aluminium heat sink for led Aluminum Heatsink Extrusion Profiles

Product Specification

(1) for the properties of the powder coating to be fully utilized and extend the life of the coating, the surface of the coated surfaces shall be first treated strictly before the surface

(2) when spraying, the coating should be completely grounded to increase the efficiency of the powder coating.

(3) to be coated with a large surface defect, the conductive putty should be applied to ensure the smoothness and smoothness of the film

(4) after spraying, the objects should be heated and solidified and the curing conditions shall be subject to the technical specifications of the powder products, but the curing temperature and time must be fully guaranteed to avoid the quality accidents due to the lack of curing.

(5) powder immediately after inspection, if discover the defect should be handled in time, if finding defects after curing, the only local without affecting the smaller range, the coated surface decoration, color powder can be used with the acetone diluted to repair, if large range and influence the surface quality, use sand paper burnish, after spraying again or use the paint remover to remove coating, powder spraying again.

(6) the recycling powder shall be filtered and removed, and then mixed with the new powder according to a certain proportion.

(7) the powder drum, powder room and recycling system should avoid the pollution of other color powder. Therefore, it must be swept clean every time.

Please tell us the information below, and we will give the best suggestion to you !

1. Where you intend to use the aluminium profiles?

2. If you have the estrusion drawing, send us and we develop the correspondence mold.

3. Which color you want or tell us the architectural style you like.

4. Purchase quantity. It will convenient us to give you the best price.

Welcome to visit our company !

Choose us & contact us !