30m Cisco Fiber Sfp Transceiver SFP+ 10GBASE-T Transceiver Copper RJ45 Module

Description

SFP+ 10GBASE-T Transceiver Copper RJ45 Module Reach 30m Cisco Compatible manufactured by ANC International Co., Limited is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7 cable with a link limit of 30 m. It is the first 10G copper SFP RJ45 module that offers 10Gb/s communication over Ethernet copper cables. In addition, this 10Gbase-T RJ45 SFP transceiver is compliant with SFF-8431 and SFF-8432 MSA. The power usage and heat generated for 10GBASE-T is 4-8 watts, but 10GBASE-T SFP+ copper transceiver consumes 2.5 watts. Obviously, the specification of SFP+ 10gbase-t rj45 transceiver has been optimized to save more than 0.5 W per port when compared to an embedded 10GBASE-T RJ45 port for link distances up to 30m. These power savings can add-up in ToR, mid-row and end-of-row switch connectivity. Implemented as an SFP+ form factor, the new 10GBASE-T copper sfp transceiver is a power-optimized solution for lengths up to 30m. SFP+ 10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3 . SFP+-10GBASE-T uses the SFP's RX_LOS pin for link indication. If pull up SFP's TX_DISABLE pin, PHY IC be reset. The SFP+-10GBASE-T has an input voltage range of 3.3 V +/- 5%.

Features

Supports Links up to 30m using Cat 6a/7 Cable

SFF-8431 and SFF-8432 MSA Compliant

Low Power Consumption (2.5W MAX @ 30m)

Fast Retrain EMI Cancellation Algorithm

Low EMI Emissions

Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T

Hot-pluggable SFP footprint

Compact RJ-45 connector assembly

RoHS compliant and lead-free

Single +3.3V power supply

10 Gigabit Ethernet over Cat 6a cable

Ambient Operating temperature: 0°C to +60°C

Applications

10GBASE-ER at 10.3125Gbps
10GBASE-EW at 9.953Gbps
Other optical links

Optical Characteristics

Low-Speed Signals

MOD_DEF(1) (SCL) and MOD_DEF(2) (SDA), are open drain CMOS signals (see section VII, "Serial Communication Protocol"). Both MOD_DEF(1) and MOD_DEF(2) must be pulled up to host_Vcc

High-Speed Electrical Interface
All high-speed signals are AC-coupled internally