Juniper Compatible Fiber Optic Transceiver 10G SFP+ Duplex LC Connector

Description

Juniper Compatible 10G SFP+ C-Band DWDM C17-C61 40KM Fiber Optic Transceiver manufactured by ANC International Co., Limited is an enhanced small form factor pluggable (SFP+) fiber optic transceiver with digital diagnostics monitoring functionality (DDM). Supporting Ethernet and Fiber Channel standards with dense wavelength division multiplexing (DWDM) wavelength makes it ideally suited for high capacity data-com and storage area network applications. DDM functionality (alarm and warning features) is integrated into the design via an I2C serial interface per the Multi-Source Agreement (MSA) SFF-8472, Rev. 11.3.

WDM systems are divided into different wavelength patterns, conventional/coarse (CWDM) and dense (DWDM). CWDM systems provide up to 8 channels in the 3rd transmission window (C-Band) of silica fibers around 1550nm. Dense wavelength division multiplexing (DWDM) uses the same transmission window but with denser channel spacing. Channel plans vary, but a typical system would use 40 channels at 100 GHz spacing or 80 channels with 50 GHz spacing. Dense wavelength division multiplexing (DWDM) refers originally to optical signals multiplexed within the 1550nm band so as to leverage the capabilities (and cost) of erbium doped fiber amplifiers (EDFAs), which are effective for wavelengths between approximately 1525-C1565nm (C band), or 1570-C1610nm (L band).

Features

Supports 9.95 to 11.3 Gb/s

Duplex LC Connector

Hot-pluggable SFP footprint

Cooled 1550nm EML laser

RoHS Compliant and Lead Free

Up to 40KM link length

100GHz channel spacing

Built-in dual CDR

Power dissipation <2.0W (0~70℃), <2.3W(0~85℃), <2.3W(-40~85℃)

Commercial and industrial operating temperature optional

SFP MSA SFF-8472 SFF-8431 SFF-8432 Compliant

Applications

DWDM 40km point to point link

Fiber Channel 10G

10G Ethernet

ITU-T G.698.1 DS100S1-2Dz

Optical Characteristics (TOP=25°C, Vcc=3.3 Volts)

Notes:

1. Measured with conformance signals defined in FC-PI-2 Rev. 10.0 specifications.

2. Measured with PRBS 231-1 at 10-12 BER.
3. GR-253-CORE Issue 4.
4. With optical input power at the receiver between -1 ~ -11dBm