E2000/APC Fiber Optic Attenuator Male to Female Single Mode 2dB 5dB 10dB

Description:

Male-female E2000/APC fiber optic attenuator manufactured by ANC International Co., Limited is used in the fiber optic links to reduce the optical power at a certain level. Commonly used fiber optic attenuators are the female to male type, which is also called a plug fiber attenuator and the female to female type, which is also called adapter-type fiber attenuator. SM E2000/APC male to female attenuator is available from 1 to 20dB attenuation with 1dB step.

As optical passive devices, fiber optic attenuators are mainly used in fiber optic to debug optical power performance & optical instrument calibration correction & fiber signal attenuation to ensure the optical power in a stable and desired level in the link without any changes on its original transmission wave.

ANC can produce below fiber optic attenuators

Male to Female fixed plug-type attenuators, such as SC/APC, SC/PC, MM SC/PC, LC/APC, LC/PC, MU/PC, FC/APC etc fiber optic attenuators;

Female to Female attenuators, such as SC/APC, SC/PC, LC/APC, LC/PC, FC Square type, E2000/APC, MU fiber optic attenuator

Variable Fiber optic attenuator, such as adapter-type VOA attenuator, inline VOA attenuator, Collimator VOA, etc

Features:

Available from 1 to 20dB attenuation with 1dB step and 25dB and 30dB, each with low tolerance

Accommodates up to 200mw high power

60dB or more typical return loss

Imported attenuating fiber, always ensure the fixed attenuation in the link

IEC, TIA/EIA standards compliance

Easy installation

High power endurance

RoHS compliant for all E2000 Male-Female Attenuator material

Application:

CWDM&DWDM

CATV systems

Data center networks

Test equipment and other high power applications

Specification:

ANC Fiber Optic Attenuators Catalogue

E2000/APC Fiber Optic Attenuator Drawing