1x4 Mechanical Optical Switch SM 1310/1550nm 1m 900um FC/APC
Description
PLC splitter is an optical power distribution device based on the integrated waveguide of quartz plate. With the features of small size, wide range of operating wavelength, stable reliability and good uniformity, It’s widely used in PON,ODN,FTTX point to connect between termination device and central office to achieve the signal splitter.
Specification
Up to 128 channels
Low Insertion Loss
Parellel interface
Highly Stable and Reliable
Epoxy-Free Optical Path
Modularized Design
Single mode and Multi-mode
Usage
Technical Data
Parameters | Unit | AC-OSW1×N | |||
Insertion Loss | dB | 1 < N ≤ 32 | 32 < N ≤ 64 | 64 < N ≤ 128 | |
Type: 0.8 Max: 1.0 | Type: 1.0 Max: 1.2 | Type: 1.1 Max: 1.3 | |||
Wavelength Range | nm | 850±40 / 1300±40,1550 | 1260 ~ 1650 | ||
Test Wavelength | nm | 850 / 1300,1550 | 1310 / 1550 | ||
Return Loss | dB | MM ≥ 30 SM ≥ 50 | |||
Crosstalk | dB | ≥ 55 | |||
PDL | dB | ≤ 0.05 | |||
WDL | dB | ≤ 0.25 | |||
TDL | dB | ≤ 0.25 | |||
ER | dB | ≥ 18(PM switch) | |||
Repeatability | dB | ≤ ±0.05 | |||
Durability | Cycles | ≥ 10 Million | |||
Switching Time | ms | ≤ 15(Sequence switch time of adjacent channel) | |||
Optical Power | mW | ≤500 | |||
Operating Temperature | ℃ | -10 ~ +70 | |||
Storage Temperature | ℃ | -40 ~ +85 | |||
Relative Humidity | % | 5 ~ 95 | |||
Dimension | mm | 135×60×35 (N≤4) | 135×60×35 (N≤12) | 135×60×35(N≤20) | |
135×60×38 (N≤32) | 165×72×65 (N≤64) | 165×130×130 (N≤128) |
Pin Configurations
DB-9 male connector (max.1×16)
Pin No. | Signal Name | I / O | Description |
1 | D0 | Input | TTL, Channel selection bit 0 |
2 | D1 | Input | TTL, Channel selection bit 1 |
3 | D2 | Input | TTL, Channel selection bit 2 |
4 | D3 | Input | TTL, Channel selection bit 3 |
5 | /RESET | Input | TTL, Low level reset to channel 0. High level means channel selection bits are effective. |
6 | /READY | Output | TTL, Ready (High=Not ready, Low=Ready) |
7 | ERROR | Output | TTL, Error (High=Error, Low=No error) |
8 | GND | Input | Ground |
9 | +5VDC | Input | 5.0±5% VDC Power Supply (max 800mA) |
Optical Route
Ordering Information
N | A | B | C | D | E | F |
Channel | Fiber Type | Test Wavelength | Tube Type | Fiber Length (Include connector) | Connector | Dimension |
1 ~ 128 | SM: SM, 9/125 M5: MM, 50/125 M6: MM, 62.5/125 X: Others | 85: 850nm 13: 1310nm 15: 1550nm 1315:1310/1550nm X:Others | 9: 900um 2: 2.0mm 3: 3.0mm X: Others | 05: 0.5m±5cm 10: 1.0m±5cm 15: 1.5m±5cm X: Others | OO:None FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC STP: ST/PC STA: ST/APC LP: LC/PC LA: LC/APC X: Others | 01: 135×60×35-DB9 02: 135×60×35-DB9-F 03: 135×60×35-DB15 04: 135×60×35-DB15-F 05: 135×60×38-DB15 06: 135×60×38-DB15-F 07: 165×72×65-DB15 08: 165×72×65-DB15-F 09: 165×130×130-DB25 10: 165×130×130-DB25-F 11: 140×77.5×35-DB15-C 12: 140×77.5×35-DB15-C-F 13: 140×77.5×64-DB15-C 14: 140×77.5×64-DB15-C-F X: Others |
Product Picture