8m simulated pine communication tower and 15m bionic tree communication signal tower

Simulation pine communication tower, bionic tree communication tower, 15m bionic tower, 8m simulation pine signal tower, 8m bionic communication tower

GH series toroidal steel pipe rod lightning rod is a kind of direct lightning protection device, which has the functions of lightning receiving, lightning diversion and side strike resistance. It has beautiful appearance, light weight, convenient installation, and is suitable for direct lightning protection in inflammable and explosive places (warehouses, explosive warehouses, warehouses, etc.), base stations, factories, substations, thermal power plants, photovoltaic power plants, communication equipment and buildings. Above: 25m circular steel pipe lightning rod

2 working principle when the GH lightning rod is under lightning, the lightning is connected by the lightning arrester and the lightning current is led to the ground. The structure can restrain the side strike to the protected object caused by the lightning receiving device. 3 technical indicators

4 structural features: there are 6 sections of lightning tower A01, a, B, C, D and E, and each section is matched according to the required height. Each section shall be hot-dip galvanized, and can be equipped with lighting platform, pre discharge lightning rod, stainless steel lightning rod tip, lightning counter, wireless grounding resistance tester, wired grounding resistance tester, etc.

5 use and maintenance 5.1 installation method to fix the end to end connection (flange connection or plug-in method) of each section of the independent lightning rod on the embedded foundation base. (some accessories need to be processed by the engineer according to the actual situation) they can be installed manually or hoisted by mechanical crane.

5.2 precautions the grounding of lightning rod must be good, and its grounding resistance value shall not be greater than 10 Ω. When the soil resistivity is high, the fired expanded graphite grounding module, high-purity resistance reducing agent, graphite cable connection and zinc clad steel are used as the vertical grounding body, and the specific quantity should be calculated according to the formula. 5.3 maintenance and inspection: before the thunderstorm season every year, check according to the following contents: (1) the connection of each connection part should be reliable and not allowed to be loose; (2) the total resistance from the air termination to the lower connector should be less than 5 Ω;

(3) the grounding of lightning rod must be good, and the grounding resistance value shall not be greater than 10 Ω. 6 design basis of lightning tower 1. Code for design of lightning protection of buildings (GB 50057-2010) 2. Code for design of high rise structures (GB j135-2006) 3. Code for design of steel structures (GB 50017-2014) 4. Code for construction and acceptance of steel structures of towers and masts (cecs80:2006)

Camouflaged tower / Bionic tree tower / Palm tree tower / Pine tree tower

Features:

1. Exquisite structure and gorgeous appearance. On base of actual plant, the bionic tower looks like a real one, plus the meticulous design, when placed among the real trees in sightseeing area, park, and square, it will be a part of the nature. The novel and unique large wire frame takes place of the traditional platform. Hidden in the leaves, so they will not affect the beauty of tower.

2. Strong structural stability and excellent technology. Tower footing adopts independent reinforced concrete structure, so the tower can effectively avoid uneven subsidence of foundation. Fixed splint for feeder wires is equipped inside the tower to prevent the feeder wires from sun, rain and wind, effectively solve damage factor, thereby extend their working life. Every section of tower body is connected by fine finishing inner flange, this design can guarantee the concentricity and perpendicularity, and avoid security risks of other connecting way

3. Small area covering and great economic effect. Tower adopts conical tube structure with area of 1-2 square meters, and foundation area of 4-6 square meters. Meanwhile there is no need to build base station walls, so it will save land resources and the cost(especially in town).

4. Long working life and lasting appearance effect. Owing to the relatively small force outside, rational structure and good materials, service life of the tower is longer. On the surface we adopt hot galvanization technology, so the tower has good corrosion resistance performance. Meanwhile, on the surface are simulated tree barks, like simulated leaves, which are made of advanced composite materials with waterproof, fireproofing and anticorrosion performance, so they can maintain the appearance without exfoliation.