Bumper Polypropylene Binder Chlorinated Polyolefin For Automotive Painting

DR-04P has good compatability with solvent-based resins. Widely used in high level coating systems and adhesives.

Characteristics and uses

1. Excellent enhancement adhesion to PET, PP, PP/EPDM substrate.
2. Bumper polypropylene binder, PP, PET, PS, PVC, anti-corrosive coating binder.
3. Good compatibility, can be directly added to acrylic acid, alkyd, etc paint.
4. Excellent interlayer adhesion with top coating, such as polyester/three melamine baking paint and polyurethane system.
5. Slightly soluble in 1,6 hexadiol diacrylate, can be used in ultraviolet photocuring system.
6. Heat resistant ink binder

Specification

Note:The above is a general state of product characteristics, not suitable for use in special purposes

Scope of application
Plastic composite binder, composite ink, with excellent adhesion

Add amount and use method
1. Mix DR-04P with xylene and dissolve into 20% for use. When considering
environmental protection (banning benzene substances), can change the solvent
into methyl cyclohexane/butyl acetate or methyl ethyl ketone is equal to 1/1.
2. When mixing with resin, please test the optimum ratio first.

Storage

1. Keep away from heat and fire
2. Store in a cool, ventilated place and keep the container tight
3. The storage environment is 10 ° C to 40 ° C.
4. The warranty period of this product is 36 months from the production date.
5. Save solid DR-04P and solution are protected from light at 25℃.
6. When the ambient temperature during storage and transportation exceeds 40℃ or below 10℃, may form clumps, please extend the solution agent soaking, low speed stirring time, this is not influence its performance.

Package

Packed into 20kgs/carton or 20kgs/bag with pallet