Automatic Pellet Mill Cooler Counterflow Cooler For Feed Factory / Plant

Introduction of Counterflow Cooler:

Counterflow cooler is the most advanced pellet feed cooling technology in the world. It is mainly used for cooling high temperature pellet feed after granulation. The machine has a unique cooling mechanism, Reverse Movement of Cooling Air and High Temperature and Humidity Material. The material is gradually cooled from top to bottom,It avoids the shortcomings of material surface cracking caused by sudden cooling in general vertical cooler, and the difficulty of moisture and heat dissipation in the core. The cooling effect is superior to the existing domestic similar products. After cooling, the material's temperature is not higher 5℃ than the outside temperature, and the precipitation rate is not less than 3.8%. It plays a good role in producing high quality pellet feed, prolonging the storage time of pellet feed and improving economic benefits.

Main Features of Counterflow Cooler:

1. The high temperature and humidity particles are cooled by counter-current cooling principle, which avoids the sudden cooling phenomenon caused by the direct contact between cold air and hot materials, thus preventing the surface cracking of particles.

2. The cooling effect is remarkable due to the use of closed air feeding and large air intake area.

3. Adopting the turning plate layout structure, the movement is stable, reliable, the residue is small, and the finished product is not damaged;

4. The octagonal section of the cooling silo eliminates the dead angle of cooling, which is low in energy consumption and easy to operate.

5. After cooling, the temperature of finished product is not higher than room temperature 3 ~5℃

6. It is suitable for cooling various granular materials, such as granulating materials, expanding materials, sheeting materials, etc.

Main Parameters of Counterflow Cooler: