100W RF Power Amplifier Module For FPV Autel Dji Boost FPV Range And Signal Strength
Frequency | 5100-5900mhz |
Power supply | 100W |
Saturated output power | 50±1dBm @input=5dbm |
Gain | 50±2dB |
In-band fluctuation | ≤2.0dB |
Out-of-band spurious | 9kHz~1GHz:≤-36dBm/30kHz 1GHz~12.75GHz:≤-30dBm/30KHz |
Input VSWR/Out VSWR | ≤2 |
Gain temperature stability | ≤±1.5dB |
Working voltage | DC+32V |
Protection | Temperature protection 90 degrees,Reverse Power 30W protection |
Working current | ≤10.5A |
Power supply monitoring interface | Power supply: Perform capacitive Pin1:485A Pin2:NC Pin3: GND Pin4: NC Pin5: PA_EN(High power on, Low level off) Pin6: NC Pin7: NC Pin8: 485B |
Iinput RF port | SMA |
Output RF port | N-F |
Dimensions | 77*180.6*24.5mm |
Working temperature | -20~+55℃ |