Fabric High Security Army Welded Blast Wall Fencing

Blast Wall Fencing Brief Introduction

The Blast wall fencing also named as the HESCO MIL,Hesco barrier,or Hesco bastion,is a modern gabion primarily used for flood control and military fortifications. It is made of a collapsible wire mesh container and heavy duty fabric liner, and used as a temporary to semi-permanent levee or blast wall against small-arms fire and/or explosives. It has seen considerable use in Iraq and Afghanistan.

Blast Wall is a prefabricated, multi-cellular system, made of zinc coated steel welded mesh and lined with non-woven geotextile.Units can be extended and joined using the provided joining pins.It is easy installed with using minimal manpower and commonly available equipment.After extended,it is filled into sand,stone,then hesco barrier like a defence wall or bunker,it is widely use in military to protect safety.

Specifications

Size

Originally designed for use on beaches and marshes for erosion and flood control, the HESCO barrier quickly became a popular security device in the 1990s.

HESCO barriers continue to be used for their original purpose. They were used in 2005 to reinforce levees around New Orleans in the few days between Hurricane Katrina and Hurricane Rita.

During the June 2008 Midwest floods 8,200 metres (9,000 yd) of HESCO barrier wall were shipped to Iowa. In late March, 2009, 10,700 metres (11,700 yd) of HESCO barrier were delivered to Fargo, North Dakota to protect against floods.

In late September, 2016, 10 miles of HESCO barriers were used in Cedar Rapids, Iowa, for the fall flood of 2016.

Application

1. Defensive Walls
2. Forwawrd operating bases
3. Accommodation bunkers
4. Perimmeter security
5. Blast and ballistic protection
6. Command& control centres
7. Training grounds & shoot house
8. Military compounds
9. Ammunition storage
10. Explosive traverses
11. Vehicle check points
12. Hostile vehicle mitigation

Produce process

Purchase the raw material wire--Zn/Ai coating test--straingting--cutting--welding panel--spring installed--attached woven fabric--packing--Loading

Quality Control Process

1. Raw material test the Zn/Ai

2. Semi-finished product test the size and quality

3. Finished Product’s Test the surface adhesive force (usually the post surface test )

4. Finished Product’s installation

FAQ

1.How about the price?
Firstly,We are always offer the best price to all of our customers.
The second, the price is based upon the quantity required. Generally speaking, the larger the quantity you request, the better pricing per unit you will receive.

Yes,all production line have adequate quality control

3. Can I get samples from you?
If we have stocks, we are glad send sample to you. But if the specification of your request do not have stocks, we are glad to customize to you basic on the Min order quantity.

4. How long the delivery time?
We will finish the production ASAP.
Production efficiency is as important as product quality

5. Minimum order
We do our best to maintain one of the lowest minimum order amounts in the
industry. Meeting customer's requirement is our ultimate goal