0ZRC0015FF1E Telecom Thermistor PPTC Resettable Fuse TRG015 With Rated Voltage 600V Hold Current 0.15A

Features

• Radial Leaded Devices
• Maximum 600 VAC interrupt fault rating
• Available in matched resistance “bins”
• Ability to withstand lightning surges

• RoHS compliant
• Resettable overcurrent protection
• Fast time-to-trip
• Agency recognition: UL, CSA, TÜV
• Resistance-sorted and matched devices available
• Low parasitic capacitance/flat impedance with frequency

______________________________________________________________________________ Download________

Electrical Perforamces

Dimension (mm)

Thermal Derating Chart – I hold (Amps)

BENEFITS

• Choice of many product options helps engineers by improving design flexibility

• Compatible with high-volume electronics assembly

• Assist in meeting regulatory equipment requirements

• Help improve line balance

• Applicable for legacy POTS and modern digital communications equipment

APPLICATIONS

• Modems

• Phone sets

• Fax machines

• Phone wall outlets

• Alarm systems

• PBX systems

• MDF modules

• Analog and digital line cards

• T1/E1 equipment

• xDSL modems and splitters

• Powered ethernet systems

• VoIP (Voice over Internet Protocol) equipment

• LAN, WAN equipment

• Customer premise equipment

• Access network hardware

Application Guide for Telecommunications and Networking Devices*

To use this guide, follow the steps below:

1. Select your equipment type from the guide below.

2. Select the type of protection depending on the agency and regional specifications in the second column.

3. Select the form factor for your application.

4. Use the Agency Specification/ PolySwitch Device Selection Guide on the next page to select a specific part number for each application based on the agency requirements.

5. Parts with fast time-to-trip or low resistance are available. Please consult a PolySwitch representative.

Environmental Characteristics

Operating/Storage Temperature........................... -40 °C to +85 °C

Maximum Device Surface Temperature

in Tripped State ................................................. 125 °C

Passive Aging................................ +60 °C, 1000 hours............................ ±15 % typical resistance change

Humidity Aging............................. +60 °C, 90 % R.H. 1000 hours ................ ±15 % typical resistance change

Solvent Resistance............................ MIL-STD-202, Method 215B................................. No change Lead

Solderability................................................. ANSI/J-STD-002

Flammability ......................................... IEC 695-2-2 .......................................................... No flame for 60 secs.

Vibration ........................................... MIL-STD-883C, Method 2007.1, Condition A ....... No change

Test Procedures And Requirements For Model TRG Series

Test Test Conditions Accept/Reject Criteria

Visual/Mech.................................. Verify dimensions and materials ........................... Per MF physical description

Resistance..................................... In still air @ 23 °C.................................................... Rmin ≤ R ≤ Rmax

Time to Trip.................................... 1 A, Vmax, 23 °C ..................................................... T ≤ max. time to trip (seconds)

Hold Current .................................. 30 min. at Ihold ....................................................... No trip

Trip Cycle Life.................................. Vmax, Itrip, 100 cycles.......................................... No arcing or burning

Trip Endurance ............................... Vmax, 24 hours..................................................... No arcing or burning