Two Poles Motor Stator Winding Machine Automatic With Touch Screen

This stator automatic winding machine is used to wind wire into stator slot. It is suitable for 2 poles stators.

(1) Main technical data:
Stator O.D: 50~90mm
Wire diameter:0.25~0.8mm
Stator stack length: 20~45mmm(standard);30~60mm(lengthen)
Stator I.D: 30~50
Slot number: 2 poles
Air pressure: 0.4~0.7MPa
Lubrication mode:Continuous lubrication oiling machine
Voltage: AC380V,50/60Hz
Weight: 1800Kgs
Dimension: 2100*1250*1830mm

(2)Application:
It is suitable for two poles stator.

(3) Machine Function and characteristic:
1. Cast iron or steel frame can absorb the shock. Accuracy is stable. The maximum winding speed is up to 450rpm (according to the wire diameter).
2. All the actions are fully automatic (including loading and unloading). The winding could be more stable and efficient.
3. The cutting part structure is in compact. Wire clamping and cutting is finished at the same time.
4. Easily to change the fixture for different types of stators.
5. Fixtures are in cycle operation automatically. It is benefit for the on-line operation.
6. Permanent magnet tensioning device enables the tension adjustment.
7. Travel and swing angle is adjusted within 150-220mm (mechanical adjustment) .It could adapt to different requirement of different stator models.
8. Two working stations

(4) Competitive advantages
Variety of application, easy operation.
We have Overseas Service Center.
Machine is controlled by PLC. All the parameter can be set in the touch screen.
It is suitable for stators with different model number and dimension.
The operation and tooling change process is easy.
We could customize machine for our customer as per their requirement.
We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.

Stator Winding machine inner part