A2D06 LED mirror front light
Product Description.
1. Open mounting snap-in installation, simple and reliable.
2. Milky white PC lampshade cover guides the light, the light is soft without obvious glare.
3. Length can be customized
4. Suitable for bathroom cabinet, beauty mirror and other types of furniture local lighting.
Product Parameters.
Product | A2D06 LED mirror front light |
Model | A2D06 |
External Material | aluminum+PC |
Size | Lx16mm Wx20mm H |
Shining angle | 300° |
CRI(Ra) | ≥90 |
Color Temperature | Warm white,white,cold white |
Working Voltage | DC12V |
Power | 10W/M |
Beads Specification | 2835beads / 120PCS/M |
input line length | 1500mm |
Packing: white box + outer box
Installation method: surface mounting
(1). Attach the clips in the desired position
(2). Pass the input wires through the crossing holes and butt them in place
(3). Attach the fixture to the carabiner
Safety Instructions
1.For indoor use only
2.Periodically check the cord, transformer, and all other parts for damage.
3.If any parts are damaged, the product should not be used
4.When installing and using this fixture, please strictly observe this instruction manual and retain it for future use.
5.The light source of this product is a non-replaceable light-emitting diode (LED).
Do not install the luminaire where water drips.
Maintenance
1.The external cords of this luminaire cannot be replaced; if the cords are damaged, the luminaire should be discarded and not be used further, different mounting surface materials must be used for different mounting hardware, be sure to select the applicable screws and bolts according to the specific fixed mounting surface.
2.Please use a dry cloth to clean, the use of strong detergent is strictly prohibited.