Rubber and plastic nail wood carpet gripper for apartment installing
Pre-nailed for ease and speed of installation when fitted to boarded or suspended timber floors, with specially tempered nails (threaded for holding power), pre-driven into the gripper. 22mm wide strip with 52 pins and 9 floor nails giving exceptional holding power.
Width | 7/8'', 1/2'', 11/4",13/4" |
Length | 4',5',1200mm |
Nail | Rubber and plastic nail |
Thickness | 5.8mm,6.0mm,6.3mm,6.5mm,7.0mm |
Material | 5 layer poplar plywood,birch wood |
Packaging | 100pcs/box,50pcs/box,70pcs/box |
Style | Simple |
Why use the carpet tack strips
The carpet is usually placed over a carpet pad. Once the carpet is rolled out and installed, it has to be tacked down. The carpet tack should grip the edges of the carpet through the carpet backing. Press down on the carpet firmly without using a hammer so the tacks don't break or bend before they get hold of the carpet. The tacks will grip the backing and hold the carpet in place. Once the tacks hold the carpet, bend the tips so that the tacks won't stick into your feet as you walk.