Automatic Aseptic Carton Filling Machine
Main features:
1. Our Aseptic cold filling line is modularly constructed for great flexibility.It combines the dumping machine,rinser,filler and capper into one unit,and the part above the table-board is full closed by shielding can.
2. The rinsing machine can wash the inside and outside of the empty bottle by aseptic water.Dripping is also available.
3. The use of non-contact filling valve effectively prevents second pollution.
4. The imported electronic weighing sensor of filling valve ensures high measuring precision and makes it convenient to adjust product variety.
5. Transmisson part of capping plunger chip uses heat shield device to effectively seperate the pollution zone and clean zone.
6. The adoption of magnetic constant torque capping head helps ensure capping quality.
7. Our Aseptic cold filling line is equipped with centralized lubrication system.
8. Automatic control of CIP and SIP operations is realized.

Name: | Aseptic carton filling machine |
Model: | GC-Z-V-6000 (100) |
Capacity: | 6000 packs/hour |
Filling volume: | 100S: 100ml ±1.5% |
Outline dimension: | 5195mm (L)*3206mm(W)*3722mm(H) |
Entrance dimension: | 2200mm*3500mm |
Weight: | 5000kg |
Power supply: | 380V±10% (3φ) 50Hz |
Electricity consumption: | Total power: 35kw Pre-heating: 20kw, sterilizing: 24kw, producing: 26kw, cleaning: 2.2kw |
Air consumption: | 1200±100L/min (0.6~0.7Mpa) |
Softened water consumption: | 15L/min (0.3~0.45Mpa, below 20℃) |
Steam consumption: | 2.5kg/h (130±5℃, 0.17±0.03Mpa) |
H2O2 consumption: | 0.6~1.0L/H (Density: 30~50%), food grade |
Lubrication oil consumption: | 0.015L/H |
Operating system: | Human-company interface |
Discharging conveyor belt: | Teeth chain |
Temperature of filling material: | 15-25℃ |
Connection format and caliber: | Side of material input: 2s SMS standard thread Side of material output: 2s SMS standard thread |
Filling pressure: | 50-150±10KPa (mechanical pontoon), 50~350±100Kpa (flow rate adjusting valve) |
Shape of container: | Brick Slim |
Environment temperature: | 19.4~25℃ |
Pressure of filling room: | >1.3mmAg |
Key Points:
- Automatic Form Feed –sterilize –filling –shaping – sealing
- User friendly interface
- Noiseless operation
Applications:
Suitable for filling liquid herb tea, dairy product, juice, milk, milk beverage, cream, yogurt, mineral water, soy milk, tea beverage, seasoning, wine, cleaning solution, chemical product, granular, dry powder and so on.
Main Components:
Name | Supplier | Country |
PLC | MITSUBISHI | Japan |
Touched screen | HITECH | Taiwan |
Electrical switch | SCHNEIDER | France |
Controlling valve | GEMU, BURKERT | Germany |
Sensor | SICK | Germany |
Main motor | ABB | Sweden |
Motorized pulley | INTERROLL | Denmark |
Pneumatic controlling | MAC, CAMOZZI | USA/Italy |
Temperature controller | OMRON | Japan |