Product Application
It can be widely used in municipal, telecommunication, electric power, gas, water, heat and other pipeline projects.
Urban and rural trenchless horizontal directional drilling power pipe drainage project, and open excavation power pipe drainage project.
Urban and rural trenchless horizontal directional drilling and drainage projects. Industrial waste water discharge project.
Product Specification
Item No. | flexible pipe (AD) | Inner × outer (mm) | Curved radius (mm) | Packaging unit (m) | ||
PE-10.0 | AD10.0 | 1/4" | 6.5×10.0 | 16 | 100 | |
PE-13.0 | AD13.0 | 5/16" | 10.0×13.0 | 20 | 100 | |
PE-15.8 | AD15.8 | 3/8" | 12.0×15.8 | 30 | 100 | |
PE-18.5 | AD18.5 | 14.3×18.5 | 40 | 100 | ||
PE-21.2 | AD21.2 | 1/2" | 17.0×21.2 | 45 | 100 | |
PE-25.0 | AD25.0 | 20.0×25.0 | 45 | 50 | ||
PE-28.5 | AD28.5 | 3/4" | 23.0×28.5 | 50 | 50 | |
PE-34.5 | AD34.5 | 1 | 29.0×34.5 | 60 | 50 | |
PE-42.5 | AD42.5 | 1 1/4" | 36.0×42.5 | 70 | 50 | |
PE-54.5 | AD54.5 | 2" | 48.0×54.5 | 90 | 25 | |
PE-74.0 | AD74.0 | 2 1/2" | 63.0×74.0 | 130 | 10 | |
PE-88.0 | AD88.0 | 3" | 76.0×88.0 | 170 | 10 | |
PE-108. | AD108.0 | 4" | 94.0×108.0 | 225 | 10 |
Construction instructions
1.It is strictly forbidden to throw, strike, carve and expose the pipe during transportation and construction.
2. The axes of the two tubes should be aligned during hot melt butt, and the end face cutting should be vertically flat.
3.The processing temperature, time, pressure, according to the climatic conditions to adjust accordingly.
4.The minimum bending radius of pipe shall be greater than or equal to the outer diameter of pipe.
Product Picture
Company Profile