BTC Miner Machinebrand-new Canaan Avalon 1246 93T

Product Description

Stable operation, high-efficiency heat dissipation of front and rear fans, self-regulating mining guard system, 93T long-time operation, same as the official parameters. Ultra-low energy consumption ratio, high performance 38.8 J/T Energy consumption ratio in the international leading.

specifications

Description

Extremely simple installation, plug and play, one-step setup, and a large number of mining machines can cooperate with cluster software to facilitate operation and maintenance. The controller has built-in AI chip, which has strong security performance. Combined with the running system, it can automatically identify malicious viruses and prevent the mining machine's computing power from being stolen.

Check the connection and power of the miner

(1) before the connection and power of the miner, shake the miner according to the warning sign on the side of the miner, check if any radiator or other components fall off, make sure there are no radiators or other time to fall off before wiring and power up. (2) the miner is connected to the power cord, the net port is connected to the switch, the power control cord, the fan, the control cord, the switch board control cord and the fan control cord are not loose, and the copper bar is connected correctly before the miner is powered up. Note: 1) when the copper bar is connected to the computer power board, the positive and negative poles of the copper bar can not be misconnected, and the screw gasket of the fixed copper bar must be aligned parallel to the edge of the copper bar, and the fixed screw must be tightened, otherwise, there is a risk of burning out the calculator board, the Control Board or the power supply. 2) the power control line between the control board and the power supply must be connected, otherwise, the power supply voltage can not be controlled, resulting in the problem of low computing power board. 3) the control panel must be reliably connected to the fan line. If the fan line falls off or is not connected properly, it may cause the miner to be unable to cool down.