Bitmain Antminer L3 + mining Litecoin Dogecoin miner 504m refurbished machine second hand l3++
Model Antminer L3+ (504Mh) from Bitmain mining Scrypt algorithm with a maximum hashrate of 504Mh/s for a power consumption of 800W.
Model Antminer L3++ (580Mh) from Bitmain mining Scrypt algorithm with a maximum hashrate of 580Mh/s for a power consumption of 942W.
Manufacturer | Bitmain |
---|---|
Model | Antminer L3+ (504Mh), L3++(580Mh) |
Release | June 2017 |
Size | 188 x 130 x 352mm |
Weight | 4400g |
Chip boards | 4 |
Chip name | BM1485 |
Chip count | 288 |
Noise level | 70db |
Fan(s) | 2 |
Power | 800W, 942W |
Wires | 9 * 6pins |
Voltage | 11.6 ~ 13.0V |
Interface | Ethernet |
Temperature | 0 - 40 °C |
Humidity | 5 - 95 % |
Antminer L3+ is another masterpiece of Bitmain. In December 2016, Bitmain officially released the L3 Litecoin mining machine. Both L3+ and L3++ are upgraded versions of L3.
Antminer L3+ belongs to the Scrypt algorithm mining machine, of course, it can mine Litecoin (LTC, also called "spicy stick"), and there are also some small currencies based on the Scrypt algorithm, but it is not recommended. Because mainstream coins are the most valuable.
The chip used in Antminer L3+ is BM1485, which is also independently developed by Bitmain. The combination has 4 computing power boards, a total of 288 chips. The rated computing power of Antminer L3+ is 504MH/S, which is twice that of L3. The power consumption on the wall is only 800W, and the power consumption ratio is only about 1.6J/MH.
The heat dissipation design of Antminer L3+ uses dual front and rear cooling fans, 12CM. One side enters the air and the other side exits the air, which can achieve a better heat dissipation effect.
What is the noise of Antminer L3+? Under normal frequency, it is between 67 and 74DB. Indoor temperature is different, the noise level will be different.
In addition, the computing power of Antminer L3++ is 580MH/S, and the power consumption is about 942W. Others are not much different from L3+.