PWM Electric Brushless DC Gearmotor 24 Volt Dc Gear Motor 235rpm
Brushless Motor Long Shaft M8 Length 116mm Gear Worn DC 12V 24V Speed Reducer PWM Electric
Specification:
No-load Speed: 8rpm,14rpm,20rpm,40rpm,80rpm,130rpm,235rpm
No-load Speed: 16rpm,27rpm,40rpm,80rpm,160rpm,260rpm,470rpm
Wiring:
Datasheet:


5840-3650 | | | | | | | | | Reduction ratio | Rated Volt | No Load | AT Load | STall | SPEED | CURRENT | Torque | SPEED | Current | TOGQCE | CURRENT | V | RPM | mA | KG.cm | RPM | A | KG..CM | A | 17 | 12 | 235 | 230 | 2.5 | 180 | 0.8 | 4.3 | 3 | 31 | 12 | 130 | 230 | 4.5 | 100 | 0.8 | 8 | 3 | 50 | 12 | 80 | 230 | 7.3 | 60 | 0.8 | 12.5 | 3 | 100 | 12 | 40 | 230 | 14.5 | 30 | 0.8 | 25 | 3 | 200 | 12 | 20 | 230 | 29 | 15 | 08 | 51 | 3 | 290 | 12 | 14 | 230 | 42 | 10 | 0.8 | 70 | 3 | 500 | 12 | 8 | 230 | 60 | 6 | 0.8 | 70 | 3 | 17 | 24 | 470 | 300 | 5 | 380 | 1.6 | 8.5 | 3 | 31 | 24 | 260 | 300 | 9.5 | 200 | 1.6 | 15.5 | 3 | 50 | 24 | 160 | 300 | 15 | 130 | 1.6 | 25 | 3 | 100 | 24 | 80 | 300 | 30 | 60 | 1.6 | 50 | 3 | 200 | 24 | 40 | 300 | 40 | 30 | 1.6 | 70 | 3 | 290 | 24 | 27 | 300 | 50 | 20 | 1.6 | 70 | 3 | 500 | 24 | 16 | 300 | 60 | 12 | 1.6 | 70 | 3 | |
Brushless dc motor advantages:
a) Electronic commutation replaces traditional mechanical commutation. Reliable performance, never wear, low failure rate, and the service life is about 6 times longer than the brush motor, which represents the development direction of electric vehicles;
b) It is a static motor with low no-load current;
c) High efficiency;
d) Small size
FAQ
1. Q: Are you trading company or manufacturer?
A: We're factory. We specialize in micro dc motor and dc gear motor for more than 14 years.
2. Q: What is the payment term for a new customer?
A: We can draw up an Ali Assurance Order Online for our new customer, which can pay online with Master Card, Visa, etc. Customer also can pay with PayPal or TT etc.
3. Q: I can't find a suitable motor on your website, can you customize the motor for me?
A: Yes, we can customize a suitable motor according to our customer's requirements.
4. Q: Do you have certificates for the motors?
A: Yes, we have CE, FCC, ISO, etc. If you have the other certificates requirement, we can apply it for you.
5. Q: How is your Quality Control?
A: We have professional checking staff on every production line process. After finishing the whole motor, we have the entire quality machine to test the motor. Such as Hardness Tester, 2.5D Image Tester, Salt Spray Chamber, Life Tester, Temperature Test Machine, and Noise tester etc.