Full Digital Networked DSP Conference Processor

VIS-DCP2000

Technical Parameters

Functions

1. Compliance with IEC 60914, GBT 15381-94

2. With VIS-CNB digital power box, it can expand to 5200 discussion units

3. Support "Hand-in-Hand-Loop-Network" connection and the system assigned to each unit independently ID to avoid duplicate ID conflict

4. Both wired/wireless discussion units can connect to the controller, fast and easily to adding delegate of meetings

5. Wireless unit supports up to 8 microphones active simultaneously, anti-interference ability is stronger than ever, compliance with IEEE 802.11n standard Wi-Fi both for 2.4GHz and 5GHz 2 channel audio input, XLR or RCA type, for local input or remote video-conferencing input

6. MAX 8 channel audio output, XLR, RCA or Phoenix type, to connect language translation system or output to different zones

7. TCP/IP connection between controller and PC

8. RS232 or RS485 to send the PELCO/VISCA protocol to realize camera auto-tracking function.

9. Hot-swap for any system unit, and the controller has auto-recovery function

10. Wide range of voltage from 110V~220VAC

11. Without using PC software, our conference controller still owns following settings:

Limit on the number of speaking persons: By Setting the number of active units at the same time(Number is 1/2/4/6/ units)

Discussion modes:

"OPEN" Free for all, limited by the active units setting by controller,"OVERRIDE" First in First out,"FREE" Turn on the MIC freely up the max. quantity, "APPLY" To apply then to speak

Voting function: Approve/Abstain/Object

Chairman unit has priority to close all other units or mute them temporarily

Chairman unit can answer the application for speaking from delegate

Simultaneous language interpretation

12 .With PC software to add more ways of voting:

Approve/Object

Approve/Abstain/Object

Level:1/2/3/4/5

Ranking:--/-/0/+/++