Industrial Auto Blasting Machine with 8 Workpieces Turntable Environment Protection

Technologies:

Description:

Inside of cabinet, there is big and small turntable, they all automatic rotate, when the pipes are put on the workparts, they will be driven to the blasting position fixed automaticlly and rotated, gun swing up and down to make sure each angle clean well. This machine can be PLC programmable and fully automatic.

The Rotary Table Sand Blast Machine extremely compact design, minimum floor space required

The Rotary Table Sand Blast Machine totally self contained, includes dust collector, separator, cartridge filtration system

The Rotary Table Sand Blast Machine no special foundations required, no extra ducting needed

The Rotary Table Sand Blast Machine ‘Clam shell‘ door design allows easy loading with truck or crane

Applications:

This machine mainly used in cleaning and strengthening the surface of the castings, and used in removing oxide and welding dregs ,it is widely suitable for the field of oil casting, forging,machinery, iron and steel industry.

Competitive Advantage:

1. The full-blast, without dead ends

2. Special rail trolley design, time-saving and easier to work;

3. The machine can be optional turntable and turntable fixed configuration of two carts;

4. The volume is relatively large, the product can be customized according to customer requirements.

PRODUCT

1, Rotary blast machine is mainly composed chamber body, turntable, transmission, separators, hoist, lose pill
device, blasting and other components, in-room high-speed rotation of the top of a blasting device, most of the workpiece good orientation when the projectile, the workpiece with the turntable turn out chamber body, cleaning effect can be seen directly, in order to carry out the next step.

2, Driven by rotary drive system board scraping pill, pill sand will flow through to the lower hoist pill tube, and then by the elevator mentioned separator to separate, intact projectile through the tube and gate input pills continuously use for blasting , and then were crushed into dust projectile and other appropriate channels to a second separation.

3, The transmission mechanism driven by cycloid reducer friction wheel transmission occurs via a clutch mechanism of friction with the turntable, the turntable rotates smoothly. When the workpiece can be used to directly transfer the outdoor flip adjustments and cleaning up the good work piece; too readily, depending on the degree of difficulty turning and handling of the workpiece to be cleaned workpiece to clutch lever pulled, so that the friction wheel and turntable from that turntable Transpose the workpiece and then stopped to change the handle position, the turntable starts to rotate again.

Packing pictures:

Please don't hesitate to contact us if you have any requirements!