TSX0508-4 Continuous Conveyor Hanger Blasting Machine Cleaning Small and Sensitive parts

Quick detail

Note: our equipment can be designed according to customer special requirements

Application possibilities

TS Continuous Hanger Machines are designed to clean a wide range of parts size and shapes. It is always come together with painting line, shot blast firstly and then painting, share one overhead rail. It with automation production sequences and improve the working environment, resulting in an efficient and cost effective blast cleaning process.

The reduced use of space, shorter transport distances and no intermediate stocking requirements can result in substantial reductions.in manufacturing cost.

Widely used in small and medium size of stainless steel parts, castings, die castings, forgings, welding structures and heat treatment parts surface cleaning and strengthening.

Advantages of using TS Spinner Hanger Machine

• High throughput with optimum Blast coverage, getting good cleaning result
• Using Mn13 wear-resistant steel plate as the protective plate, which effectively improves the service life of shot blasting chamber.
• Equip with pulse-jet reverse air blowing system on dust collector, automatic clean the cartridges
• Small machine footprint with flexible design

Machine Introduction

The equipment mainly consist of entry/exit vestibule, blasting chamber, wheel, hanger transport system, slot pipe, elevator, separator, abrasive feed system, dust collector and electrical control system.

Working principle

the workpiece is loaded on the hooks, then transported into the blasting cell. Products are blasted by the high speed shots accelerated by impeller, rust and dirt is removed. Then transported out.

The mixture fall off into the longitudinal screw conveyor at the bottom of the cabinet caused the blast process by gravity, then transported to elevator, lifted by the bucket on the belt, thrown into the separator. The mixture will form a uniform flow by gravity, the dust will be sucked into dust collector, the good shots will be collected into hopper for recycle using.

The dust will be absorbed on the cartridge surface, the cleaning efficiency is up to 99%. The purity air will be discharged to outside.