Manual Control Mode Steel Parts Cart Sand Blast Cabinet , Suction Blast Cabinet

Specifications

What is a Blast Cabinet?

A Blast Cabinet is a unit where an abrasive blasting process is utilized inside a closed loop system. Unlike the conventional blast pots, the cabinets allow the operator to blast the workpiece, keeping the spent abrasive contained inside protecting the operator and surrounding area while recycling the abrasive continuously.

Types of Blast Cabinets

There is two main types of blast cabinets known as Pressure Blast Cabinets and Suction Blast Cabinets. The most effective of the two is the pressure blast cabinet which utilizes a pressurized container to blast the workpiece resulting in much higher productivity, brilliant for high volume blasting. Siphon cabinets, also know as suction cabinets, use much less compressed air and are generally smaller units making them perfect for smaller workshops or lower productivity environments. Siphon cabinets uses a compressed air stream inside a siphon blast gun to create a vacuum in a chamber creating a negative pressure, pulling the abrasive into the nozzle whereas the Pressure Cabinets push the abraisve out of a pressurized vessel, through a metering valve and out of the nozzle.

TS blast cabinet is suitable for less demanding users who still expect reliable and high-quality blasting cabinet.

Main characteristics of the machine:

Right side door for easy loading.

Resilient-to-scratches LED lighting system for exceptional visibility

Foot pedal operated blasting

Automatic safety switch

Tool-free glass change in minutes

Actual space requirements for a complete system depends on the equipment configuration, options and requested work flow. Take care also about additional work space for the operator and for maintenance access.

TS blast cabinets can be customized with many optional accessories like:

Boron carbide nozzles 6, 8, 10 ,12mm

Blow-off (blowing) gun

Blast gun holder

Inside rubber lining

Rubber/plastic blast gloves

Metal ring for glove attachment

Manual turntable

Feet pedal

Recommended equipment and accessories:

Abrasive media

Dust collector or recycling unit

It is used to:

Remove rust, mill scale, heat treatment scale, and carbon build up from metals

Strip paint, powder coating, plating, and anodizing from parts for rework

Eliminate burrs, parting lines, flashes, and other defects from castings and injection-moulded parts

Remove residual sand from castings

Beautify steel, stainless steel, aluminium, brass and other metals with a uniform satin finish

Etch artwork and apply lettering on glass, stone, plastics, metal and other materials

Clean release agents and material build up from moulds

Packing of Cart and Turntable: