1.Double Sheet Controller

The small details of double-sheet control, the contact wheel adopts soft and hard rubber wheels to reduce the friction between the paper and the lower roller. However, similar products use iron wheels directly to save costs, and iron grinds iron, which is easy to cause damage.

2. Electric Adjustment Feeder System

In order to facilitate the replacement of different paper sizes, you can precisely control the position of the feeder's head and feet. After manually measuring the length of the paper, move the red pointer to the actual measured length of the paper through the electric button, or manually fine-tune it through the handle. The advantages of this system are: easy adjustment, saving time and effort.

3. Professional Die-cutting Machine Pressure Wheel Structure

Since similar products adopt the round belt guide wheel structure, there are often broken belts, dropped belts, and deviation phenomena. Therefore, at the beginning of the design of this machine, the special pressure rollers for standard die-cutting machines are used to convey paper. The advantages are: extremely high stability and Durable.

4. Professional Vacuum Pump

This machine adopts the 80 dry vacuum pump specially used for post-press packaging, which provides stable suction for the manipulator and all suction cups, and blows with the large flow required by the feeder part. Advantages: low noise and low energy consumption. However, similar products use vacuum generators, and the suction cup must use a high-power screw compressor to provide a stable air source to work. Due to the large air consumption and instability, it is not recommended to use a vacuum generator.

5. Install Frequency Conversion

The feature of this machine is to install a frequency converter on the side of the control panel of your die-cutting machine or bronzing machine, and control the speed of the die-cutting machine through frequency conversion speed regulation. It come up to combine the Feeder system and your machine together, then it can help operate the machine by the button, the feeder and the machine working speed can be increase or decrease the speed together. The advantage is: the installation position of the frequency conversion control is together with the control button of the die-cutting machine, making it very convenient to operate.