Surgery Medical N95 / KN95 Mask Making Machine / high Speed Face Mask Machine Production Line

Equipment Overview:

ZY-M900 is a semi-automation fold mask production line (typical models such as KN95 masks).

The equipment is loaded in a full roll. Multi-layer non-woven fabric rolls are subjected to compound roll welding. The nose line is unwound and cut after welding. After being rolled and cut to length, it is welded, and then the body is folded in half.

After ultrasonic welding and fusion, the final mask is rolled and formed.

The main composition of the equipment structure:

1. The equipment is equipped with Max6 sets of cloth unwinding and a roll diameter of Max600mm;

2. The fabric unwinding adopts the active unwinding method, and automatically unwinds according to the position of the tension roller;

3. Nose bar welding module: including the functions of nose bar unwinding, nose bar leveling, fixed length conveying, cutting and welding;

4. Fabric compound roll welding unit: adopts ultrasonic welding head and steel mold welding method, roller parallelism and position are accurately adjusted during welding, and the welding system has cooling function;

5. The material driving unit adopts a servo motor to control the main driving roller to drive the cloth, running smoothly, and the pressure is precisely adjustable;

6. Folding forming unit: adopt adjustable triangle plate with adjustable height and angle to ensure that the mask is neutrally folded in half.

7. Forming welding unit: ultrasonic welding is used, the welding is firm, the pattern is clear, the pressure of the welding system is adjustable, the welding system has a cooling device, and the technical parameters of the ultrasonic welding system are adjustable;

Equipment installation and configuration requirements

(1) Equipment size: 5200mm (L) × 1500mm (W) × 1900mm (H);

(2) Appearance color: international standard titanium warm gray 1C, if there is no special instructions, follow this standard;

(3) Equipment weight: ≤ 1000kg, ground bearing ≤ 400kg / m2;

(4) Working power supply: equipment 220VAC ± 5%, 50Hz, rated power about 14kw;

(5) Compressed air: 0.5-0.7mpa, with a flow rate of about 300L / min;

(6) Operating environment: temperature 10-35 ℃, humidity 5-35% HR, no combustible, corrosive gas, no dust (cleanliness no less than 100000).

FAQ

1. Q: Can you provide overseas services?

A: Engineers can serve overseas.

2. Q: How to use the machine?

A: Before sending the packaging machine to you, we will install it and test it, and then pack the whole device in a wooden box, so you do n’t need to install it again,

3. Q: Test packaging before shipment?

A: we will surely 100% of the experimental test machine will be normal without problems.

4. Q: What is the warranty period?

A: One year and offer whole life service.