Automatic aluminum milk can labeling machine
1.product name: automatic tin can labeling machine
2.Type : HG-01
3.Tin can size : D:68mm * H: 100 mm
4.Label size : L210mm * W:100mm
5. labeling speed : 120-200 pcs per minute
6. Power : 220 v 60HZ 3 phases
Application:
This is automatic cold glue labeling machine , this labeling machine is suitable for canned such as canned fish ,canned sea food ,canned fruit, canned beans ,dog tin cans ,cat food cans etc .
Features:
1.This machine is used for metal tin labeling. The tin rolled into the machine, by the pressure in the tin rolling on the belt drive, when the tin pass through the hot melt adhesive points, can be coated with a hot melt adhesive, along with the moving of tin, the tin part with glue will press the front of the label and stick the label on, and began to be rolled in on the tin. At the same time, the label end was glued by gluing mechanism. With the tin moving on, the label has been affixed to the tin on a roll. Then get out of the machine driven by rolling belt.
2.This machine has alternately label supply mechanism, no need to stop the machine when add label.
3.The end glue supply is controlled by tin. It will not supply glue if without tin.
4.Machines using frequency control can be adjusted according to production requirement.
5.The machine is only to change a few parts for replacing different size tin, the label adhesive only in
two ends, with less glue and low cost.
Model | HG-01 |
Capacity(BPM) | 200-500 |
Diameter of cans | 45-114mm |
Height of cans | 30-270mm |
Size of label (L*H) | L160*370 mm W:25-236 mm |
Vertical error | ±1 |
Labeling rate | ≥99.8% |
Power supply | 380V three-phase,50HZ |
Motor power | 2.62KW |
Gas consumption | 2-4kgs/Min |
Glue | Hot melt glue +Cold Glue |
Net weight | 750KG |
190mm width conveyor belt
Click following for more complete Information for all kinds of Labeling Machine