Higee Automatic paper cans labeling machine cold glue labeling machine for food grade composite paper can
Application:
This is automatic paper can wet glue labeling machine,the machine is suitable for circle for round products in the food, condiment, medicine, wine, oil, cosmetics and other industries various round bottle paste labeling.
The machine is sutiable for paper can,glass bottle,metal tin can etc
Features:
1.This machine is used for metal tin labeling. The tin rolled into the machine, by the pressure in the tin rolling on the belt drive, when the tin pass through the hot melt adhesive points, can be coated with a hot melt adhesive, along with the moving of tin, the tin part with glue will press the front of the label and stick the label on, and began to be rolled in on the tin. At the same time, the label end was glued by gluing mechanism. With the tin moving on, the label has been affixed to the tin on a roll. Then get out of the machine driven by rolling belt.
2.This machine has alternately label supply mechanism, no need to stop the machine when add label.
3.The end glue supply is controlled by tin. It will not supply glue if without tin.
4.Machines using frequency control can be adjusted according to production requirement.
5.The machine is only to change a few parts for replacing different size tin, the label adhesive only in two ends, with less glue and low cost.
Technical Parameters:
Model | HAJ-80 |
Capacity(BPM) | 60 -100 |
Diameter of bottle | 30-110 mm |
Size of label (L*H) | 50-330—40-150 mm |
Vertical error | ±1 |
Labeling rate | ≥99.8% |
Power supply | 380V three-phase,50HZ |
Motor power | 1.0KW |
Gas consumption | 4-6kgs/Min |
Glue | Water-soluble phenolic resin adhesive |
Net weight | 450KG |