Fuel tank level gauge float Magnetostrictive Liquid Level Meter probe, Automatic Tank gauging system for gas stations

Autoamtic tank level gauge consists of a 2-way probe: it has 1 floating sensor reporting the lever of fuel and one more reporting the level of water at the bottom. This probe is wired to Your console inside your gas station's back office. The following picture shows a typical UST equipped with this system.
The main drawback of the method is that due to the difference in density between water and the fluid resulting from phase separation, the float at the bottom of the probe will indicate the level of water but not the same of the phase separation fluid which sits In the event that the lower float is calibrated to respond to water's density so it floats in water, but the density of the phase separation fluid is lower than water's and variable. In effect, you can see accumulation of water in the tank but You are blind to phase separation fluid.

Guihe ATGs consists of Magnetostrictive Probe+TCM-1 Smart Console.

SYW-A Magnetostrictive Probe TCM-1 Smart Console

SYW-A Probe +TCM-1 Touch Control Console + Internet

* Industrial design, long service life, fast in running.

* Excellent compatibility with different brand Central Control System.

* Integrated design for the safety barrier and control console in order to easy installation and lower the cost.

* Information are stored in memory for future inquiry.

* It enjoys a tank tilt compensation function

* It can connect with explosion-proof ringer outdoors avoiding the product spilled

* With an embedded printer it can print inventory reports, delivery reports, leak reports and shift reports

* It can monitor up to 12 tanks and display dynamically the product level and water level with colored graphics in proportion.

* After connected with Central Control System though internet, it can provide information for manager to manage the inventory, delivery and the sale of the product.

Probe Performance

APP or web check for mobile phone and web.

Users can check petrol station tank gauge information on App

Users can logon our remote inquiry website, enter their petrol station name and password to check their petrol station tank gauge information.

♦ Liquid level measurement of petroleum, chemical, pharmaceuticals, food, beverage and other industries.

♦ Liquid measurement and level detection of gas station.

♦ Measurement and detection of automatic refueling and selling system.

♦ Sewage treatment

The following preparation should be down before the liquid level meter installation.

• Vertical-pipe
• Blind plate
• Wiring RVVP-4*0.75 shied cable from tank farm to control room, galvanized pipe on the outside of the shied cable. The cable from tank farm to control room can not have a connector.
• The part of the galvanized pipe exposed from the wall of manhole length about 100mm, its outer thread (G3/4) length of 25mm, using for connection with explosion-proof box.