R5F10PGHCKFB#55 Microcontroller IC 16-Bit 24MHz 192KB (192K x 8) FLASH 48-LFQFP

R5F10PGHCKFB#55 are from factory inventory, pls check your demands and pls contact us with with target price.

Specifications of R5F10PGHCKFB#55

Features of R5F10PGHCKFB#55

* Minimum instruction execution time can be changed from high speed (0.03125 μs: @ 32 MHz operation with high-speed on-chip oscillator clock or PLL clock) to ultra low-speed (66.6 μs: @ 15 kHz operation with low-speed on-chip oscillator clock)

* General-purpose register: 8 bits × 32 registers (8 bits× 8 registers× 4 banks)

* ROM: 16 to 256 KB

* RAM: 1 to 20 KB

* Data flash memory: 4 KB/8 KB

* High-speed on-chip oscillator clock• Selectable from 32 MHz (Typ.), 24 MHz (Typ.), 16 MHz (Typ.), 12 MHz (Typ.), 8 MHz (Typ.), 4 MHz (Typ.), and 1 MHz (Typ.) (Selectable from 64 MHz (Typ.) and 48 MHz (Typ.) when using Timer RD)

* Low-speed on-chip oscillator clock: 15 kHz × 2 channels (one for WWDT and one for CPU and peripherals other than WWDT)

* On-chip PLL (×3, ×4, ×6, ×8)

* On-chip single-power-supply flash memory (with prohibition of block erase/writing function)

* Self-programming (with boot swap function/flash shield window function)

* On-chip debug function

* On-chip power-on-reset (POR) circuit and voltage detector (LVD)

* On-chip watchdog timer (operable with the dedicated low-speed on-chip oscillator clock)

* Multiply/divide/multiply & accumulate instructions are supported

• 16 bits × 16 bits = 32 bits (Unsigned or signed)

• 32 bits ÷ 32 bits = 32 bits (Unsigned)

• 16 bits × 16 bits + 32 bits = 32 bits (Unsigned or signed)

* On-chip key interrupt function

* On-chip clock output/buzzer output controller

* On-chip BCD adjustment

* I/O ports: 16 to 92 (including one input-only pin)

* Timer

• 16-bit timer array unit: 8 to 16 channels

• 16-bit timer RD: 2 channels (six triangle-wave outputs; sawtooth wave/triangle-wave modulation)

• 16-bit timer RJ: 1 channel

• Watchdog timer: 1 channel

• Real-time clock: 1 channel

* Serial interface

• CSI

• UART/UART (LIN-bus supported)

• LIN module (master/slave supported)

• I2C/simplified I2C

• CAN interface (RS-CAN lite)

* 8/10-bit resolution A/D converter (VDD = 2.7 to 5.5 V): 4 to 31 channels

* DTC (Max. 44 sources)

* ELC (Max. 26 channels for event link source, Max. 9 channels for event link destination) Note

* Safety functions (CRC calculation, Clock monitor, AD test, SFR guard, etc.)

* 8-bit D/A converter Note

* On-chip comparator: 1 channel (input pin: 4 channels) Note

* Power supply voltage: VDD = 2.7 to 5.5 V

Applications of R5F10PGHCKFB#55

General automotive electrical applications (motor control, door control, headlight control, etc.), motorcycle engine control

Environmental & Export Classifications of R5F10PGHCKFB#55