Steel Bar Welded Mesh Machine For Producing High - Level Construction And Bridge Mesh

description

1 This welding machine with frame structure is used PLC control, specially for welding rebar mesh, used in wall, floor pouring, bridge, tunnel, support in coal mines, etc.

2 The space between longitude is adjustable before welding; The space between each woof can be pre-set in the PLC (different spaces can be preset).

3 This machine is used of water-cooling welding transformer, and enlarged the range of wire diameters.

4 When welding a row of woof bar, the welding transformer will be worked separately, in order to reduce capacity requirements of power transformer and current shock.

5 Woof bar feeding device with stepper motor drive can be dropping rebars automatically, and the woof bar can be placed accurately.

Features

1. Water-cooling transformer and water-cooling lower electrodes to make sure the welding firm during a long working time, and prolong the service life.
2. Feeding and Welding System Cross wire feeding: Firstly, the coil wires are straighten and cut into fixed length by straightening cutting machine, which become weft wire. Then worker put the weft wires into wire hopper. Wire hopper under the control of step motor, the weft wires falling automatically one by one
Line wire feeding: warp wires are the same to weft wires, firstly use straightening cutting machine to straighten and cut coil wire into fixed length. Then the line wires are sent by labor and fed automatically, when it welding and drawing, labors can prepare the wires, it increases the production efficiency.
3. The mesh pulling system is controlled by step motor, which makes the pulling mesh aperture more standard and accurate.

Specification