Wholly Sealed Heavy Loaded Car Parking Lock For Intelligent Auto Management System
Keywords:
parking lock, remote control parking lot lock, parking guard, parking barrier, parking position lock, parking space saver, parking bollard, parking equipment, parking device, parking guardian, parking system.
Introduction of car parking lock:
Car Parking Lock is designed to provide parking for the general public, as well as for drivers
with special privileges and needs. These include spaces reserved for monthly, annual renters,
owners, renters of condominium, co-op parking spaces, disabled drivers and company executives
and visitors. In dedicated parking garages, access to the entire garage or to a designated area
within it can be restricted using a single access controlled barrier. In a mixed-use application,
however, access needs to be controlled on an individual parking space basis.
Features of car parking lock:
Easy to Use
Easy to Install
Rechargeable Battery with Long Continuous Use
Your parking lock is powered by a rechargeable battery. After being recharged, it will lasts for about 1000
uses, or about 6 months continuous use. Your parking lock comes with a recharging power pack.
Heavy Duty and Durable
The housing adopts high quality steel rolling which can bear Max. 5 ton weight. With spray plastic coating,
the housing is waterproof, rustproof and dust proof enough to last about 5 years in hard weather.
The sway arm made of steel rolling won`t deform even it is crushed by a vehicle.
Burglar-proof for safety
The expansion bolts are placed inside the housing of parking lock, can`t be removed without a key of the
housing. In case someone tries to remove it without permission, the parking lock will alarm loudly to remin
its owner and also scares the thief.
Auto-re-position
In case a vehicle hit the parking lock from its front side, the sway arm will be forced to close down with
alarm sound, and once the vehicle left the sway arm will automatically raise up till vertical. With the
remoter, you can even hold position of sway arm when it was hit by a vehicle.
180/90 Degree Anti-collision (Available for some models)
In case a vehicle hit the parking lock from its front side, the sway arm will be forced to close down with
alarm sound, this will protect both vehicle and the parking lock.
Anti-disconnecting for Power Safety
The power connection is anti disconnecting design in case the use misplace the battery causing short
circuit.
Alarm Against a Hit
In case a vehicle hit it, the parking lock will alarm loudly to remind the driver.
Noise-free
The transmission design on motor makes almost zero noise, which is good for battery and motor longevity
and less friction, also goods for quiet environment.
Manual control in case of no power
In case the power is off, just manually control the parking lock in emergency.
Alarm Against a Low Battery
If the battery is low, the parking lock will alarm to remind the owner to recharge the battery.
Specifications:
Item | Specification |
Motor voltage | 12Volt DC |
Battery | 12Volt 7.0Ah sealed lead-acid |
Power Consumption(operation) | 20W |
Power Consumption(standby) | 30mW |
Remote control distance | > 30m |
Running time | 5s to 6s |
Applications car parking lock:
Car parking lock has been installed in the following types of applications: Office buildings, residence condominiums, hospitals, airports, shopping centers, stores, school, university, supermarket individual user and etc.