Frequency Converter 1500W Motor Power Encoder Limit Switch Heavy Duty Sliding Gate Opener

PRODUCT DESCRIPTION

SL3000BP sliding gate opener is applicable to gate weight less than 3000kg.The drive mode adopts the rack and gear transmission. This gate opener must be installed inside the enclosure or yard for protection.

Main technical parameters

Technical parameters
Model SL3000BP
Power supply 220VAC/50Hz
Motor power 1500W
Control model Frequency converter
Gate moving speed 10m/min
Maximum weight of gate 3000kg
Max. output torque 220N·m
Limit switch Encoder
Noise ≤60dB
Working duty No limit
Working temperature -20℃ - +50℃
IP Level IP54

MAIN FUNCTIONS AND FEATURES

1.Frequency inverter control unit.
2.Keypad / single button interface.
3.Alarm lamp, Photo beam & safety beam interface.
4.User can select auto-close function.
5.Auto-reverse when hitting obstacle during closing.
6.manual release design for emergency purposes.
7.Thermal protection built in motor winding.
8.There is a cover protection for the gear, it’s more safe.
9.Turbine and worm drive setup, working steadily.
10.Soft-start and slow-stop technology, auto-reverse function.
11.Multiple interfaces(infrared, solar, Bluetooth, alarm lamp, camera, external buttons, etc.)
12.Assemble easily. In case of power failure, the gate can be opened and closed manually after release clutch.

Preparation work before installation

Please make sure that the sliding gate is correctly installed, the gate rail is horizontal, and the gate can be manually moved smoothly before installing the gate opener.

Cable installation

In order to guarantee the normal operation of the gate opener and protect the cables from damages, please bury the motor & power cable and controlling cable separately with two PVC tubes.

Concrete pedestal

Please precast a concrete pedestal with the size can firmly install the gate opener. Please make sure the distance between the gate and gate opener is appropriate before casting the pedestal.

Warning

Before installing the main engine, make sure that the safety stop blocks are in place and whether it has the function of preventing the gate from running out of the rail or safety range.

·Please make sure that the main engine and its components have good mechanical properties, and the gate can be operated flexibly when manually moved before installing the main engine.

·Please note that for this product, one control can only drive one main engine, otherwise, the control system will be damaged.

·Do not install the product more than 5 cm above the ground.

·Earth leakage circuit breaker must be installed in where the gate movement can be seen, and the minimum mounting height is 1.5m to avoid being touched by children.

·After installation, please check whether the mechanical property is good or not, whether gate movement after manual unlocking is flexible or not, whether the installation for infrared sensor (optional) is correct and effective.