Product Specification | |||
Center Frequency | 24 GHz | Horizontal Beam Width | 11° |
Vertical Beam Width | 43° | Distance Adjustment Range | 2.0 m~6 m (8 levels) |
Response Time | 100ms | Vehicle Inspection Miss Rate | 0.1% |
Coverage Range | 0 m~6 m | Pedestrian Detection Miss Rate | 0.1% |
Signal Output | switching value | False Detection Rate | 0.05% |
Main Features
Detection Accuracy
With millimeter wave working signal, radar detector has high working frequency, directional accuracy and strong anti-interference and so on excellent performance. The detection rate of different types of vehicles (including cars, trucks, and aluminum vehicles) is higher than 99.9%. The detection rate of pedestrians is higher than 99.9%.
Low Cost to Install and Maintain(no need to damage the road surface)
The car radar detector is easy to install, maintenance-free, highly reliable and easy to replace. It not only overcomes the problems of high construction cost and maintenance difficulties for the installation of the ground sense coil that needs to damage the road surface by personnel, but also solves the problem of barrier rod control.
PRODUCT PHOTO
MAIN FEATURES AND ADVANTAGES
24GHz Anti-collision don't need to cut the ground, the installation is simple.
It can distinguish pedestrians and vehicles, with strong anti-interference, safety and reliability.
Wide range of use, most of the road gates in the general market, compatible with straight rod machines, fence machines, curved arms, advertising gates, airborne gates.
Internal circuit adopts high quality electronic components, with stable performance.
The Vehicle Detector is mainly used to detect the existence and passing of vehicles.
All-weather Work
The working signal of the car radar detector is in the millimeter wave frequency band, with no need for special heat dissipation. Under the weather conditions such as rain, snow, hail, haze, etc., it has the ability to work continuously day and night. The detector shell has IP-65 waterproof requirements, there is no need to worry about rainwater entering the radar and causing radar damage.
Are you still troubled to install loop detector and loops with the below disadvantages?
1) Cutting ground-Waste time and not good looking;
2) Complex wiring-Messy and Difficult;
3) Mud road-Cannot fix the loop;
4) Cannot detect big truck, trailer or other vehicles with high-bed.
Why choose barrier radar detector?
1) Can replace loop detector completely; no wiring layout, save time and cost.
2) Easy installation; Easy parameters setting; Adjustable distance from 1 to 6m.
3) Work in range of 24-24.5Ghz without effects from any climatic environment.
4) Can effectively distinguish vehicles and humans to avoid any hitting.
5) Can be used for trigger detection, e.g. trigger camera to capture the picture.
6) Can be used to trigger the alarm in the warning zone.
7) Can record the traffic and no data is lost when power is off.