Product description

The tyre-killer is made of A3 steel and steel blade(Shape looks like speed bump). It adopts the mechanical and electrical integration remote control device,easily operated,safe and reliable.It is advanced equipment to intercept forbidden vehicles and terrorist vehicles.

SINOMATIC electromechanical tyre killers are controlled by a PLC. Open/close function can be achieved by every kind of card readers, biometric readers like fingerprint etc, radio control on/off switch or key switch etc. Besides, safety accessories like loop detectors, photocells, flashing lights or red/green light can be integrated to the control electronics very easily. Time delay arming of the tire killer can be adjusted between 0-60 seconds.

TECHNICIAL SPECIFICATIONS

FUNCTIONS & FEATURES

1. Firm and anti-collision. The tyre killer body and spikes are made of 10mm thickness standard Q235

carbon steel with strong load-bearing and destructive power.The structure is firm and durable.

2. IP68 military protection standard.

3. Speedy and Low noise.The hydraulic tyre killer is hydraulically powered through both the raise and lower

cycles, taking much less time and lower level of noise to operate.Typical operating (opening /closing) time

is 1-2 seconds.

4. Safe and Reliable.Single phase drive motor, or a three phase motor to allow very high frequency of operation.

This is ideal for large car parks or busy sites. Environment protection, low power consumption and high reliability.

5. Flexible control method, The system support remote control and drive-by-wire typically. For remote control,

the controller is available to work 30 meters far away from the blocker device(depends on the radio communication

environment on site).

6. Back up solution,Support manual operate mode,the spikes can lift or fall on level place by manual when power-off.

7. Convenient maintenance. It is easy to check, test and fix the problem.

8. Functional and Manageable: Safety accessories like photocells, inductive loop detectors , beam sensor can

be integrated to the system very easily.

9. It can be installed with other access control elements (for example bollards, road barrier, turnstiles, fire alarm

system, traffic light) in order to achieve an access control check-point at the highest level of security.

10. Wide range of optional configurations: Can be custom designed to suit your requirements and can be built

in an almost infinite range of thickness and length to suit any roadway or level of security.