Black Color 24 GHz Frequency Low Cost High Reliability Parking Gate Barrier Sensor Radar Detector

Radar Vehicle Detector Advantages

The Radar Vehicle Detector has the advantages of convenient installation and maintenance, no need to damage

the road surface, no impact on vehicle access, advanced technology, reliable and stable operation, high cost

performance, convenient setting of working distance, all-weather and all-weather work, compatible with straight

poles and billboards/fence Advantages such as brake lever application.

The barrier radar detector adopts standard 12V DC power supply, which can adapt to the 6V~18V power supply

voltage range, adapt to large voltage fluctuations, and the power supply current requirement is not large. It can be

directly powered by the barrier control panel, without the need for a separate power supply device.

The schematic diagram of radar installation and connection is shown in Figure

Mechanical properties

Dimensions: 105 mm×78 mm×26 mm; ·

Weight: 85g; ·

Waterproof: IP65

Supply Voltage Range: DC 6V～18V

Supply Current: less than 90 mA/12V. ·

Operating temperature: -40℃～+85℃; ·

Humidity: relative humidity 99% at 25℃.

MAIN FEATURES

Detection Accuracy
With millimeter wave working signal, radar detector has high working frequency, directional accuracy and strong

anti-interference and so on excellent performance. The detection rate of different types of vehicles (including cars,

trucks, and aluminum vehicles) is higher than 99.9%. The detection rate of pedestrians is higher than 99.9%.

Low Cost to Install and Maintain(no need to damage the road surface)
The car radar detector is easy to install, maintenance-free, highly reliable and easy to replace. It not only overcomes

the problems of high construction cost and maintenance difficulties for the installation of the ground sense coil that

needs to damage the road surface by personnel, but also solves the problem of barrier rod control.

Convenient Power Supply
The car radar detector adopts standard 12V DC power supply, which can adapt to the 6V~18V power supply voltage

range, adapt to large voltage fluctuations, and the power supply current requirement is not large. It can be directly

powered by the barrier control panel, without the need for a separate power supply device.

All-weather Work
The working signal of the car radar detector is in the millimeter wave frequency band, with no need for special heat

dissipation. Under the weather conditions such as rain, snow, hail, haze, etc., it has the ability to work continuously

day and night. The detector shell has IP-65 waterproof requirements, there is no need to worry about rainwater

entering the radar and causing radar damage.